Exhaust manifold coating
 

Hi all, I'm looking for a coating I can apply to my ram horn exhaust manifolds. I would like something that I can apply myself that will hold up on a daily driver. The manifolds have been bead blasted and are clean. I would rather just leave them bare if noting is recommended. I don't really want to send them out for this. Thanks for any recommendations.
Hairball

Re: Exhaust manifold coating
 

Just did this w/POR15, we will see how it holds up

Re: Exhaust manifold coating
 

I’ve used this brushed on my manifolds.
Worked really well. I lived in a very harsh environment at that time. Down to -40 winters.

https://www.eastwood.com/factory-gra...p-coating.html

Re: Exhaust manifold coating
 

I did Por15 as well. But you have to follow the instructions so make sure to bake them at 400deg or it will flake.

Re: Exhaust manifold coating
 

Thanks Cyclone. Just curious how much paint did you use to do both manifolds. It looks very nice!

Re: Exhaust manifold coating
 

Rustoleum cold galvanizing compound is relatively cheap as compared to specialty products, comes in a spraycan, and doesn't burn off. But...it's silver colored. Edit: It will scratch off however.

Re: Exhaust manifold coating
 

how does it hold compared to say header paint? i got an old set of cyclone headers for my 230 from an old speed shop inventory. Basic black shipping spray. I don't care if they are silver.

Re: Exhaust manifold coating
 

So I looked at the date on my earlier pic and it was December 19 of 2016. I likely had recoated them at that time since I had just changed my engine color from Chevy orange to Ford gray. Here's how they look today after the truck regularly being used sporadically around town and for weekend day trips

Re: Exhaust manifold coating
 

These manifolds on my other 283 were done llike 7 to 10 years ago and the truck is driven harder, faster and on much hotter days with an A/C adding to the load.

Re: Exhaust manifold coating
 

Thanks everyone for all of the suggestions, it gives me some ideas on which products will work for me.

Re: Exhaust manifold coating
 

I coated 4 manifolds, with 2 coats per instructions. There is a little left in the 8 ounce can.

Re: Exhaust manifold coating
 

I used KBS Extreme high heat rattle can. I like the look. My truck isn't a DD yet, so I don't know how well it will hold up, but they look good right now. :D

Re: Exhaust manifold coating
 

Dice Roller....those are awesome.

Re: Exhaust manifold coating
 

Thanks Dave! I voted for your truck as TOTM...love the originality!

Re: Exhaust manifold coating
 

On my rams I used silver high temp heat from Auto parts. Truck is a daily and has gotten plenty of use in all types of weather over the last 2 years. After blasting them the paint has held up fine. Every now and then you can see a little change of color from the pores but a little touch up and they are fine...