64 Chevy C10 Spindle Confirmation
 

Good Afternoon!

Forgive me. When I uploaded my spindle picture, the upload process turned the picture 180 degrees. So it is totally upside down.

I could not figure out how to turn it back round once I uploaded to the site. Please tell me how to correct this for the future. I am hoping that when you read this, the picture can be rotated.

Since my wheel bearing have gotten noisy, and since I have no idea how long the current rotors and calipers have been on, I wanted to change out the entire setup. I am hoping I can use the existing spindles.

Can you tell from the picture if the spindle looks like an OEM drum spindle? I think it is. My desire is to use the existing spindles. I took that approach for my Chevy car and it worked out fine. If I go this route, I just want to make sure and not order a kit that will not be compatible with the spindles I have.

I will be thankful for all responses.

Edward

Re: 64 Chevy C10 Spindle Confirmation
 

No that is definitely not an original drum brake spindle. It looks to me like a '73-'87 spindle. It is quite easy and in expensive to just change the bearings and seals.

Re: 64 Chevy C10 Spindle Confirmation
 

I hear you Captain. Thank you.

Edward

Re: 64 Chevy C10 Spindle Confirmation
 

Saved & flipped.….