63 gmc windshield gasket
 

I had a windshield installed and the top corners are not sealing right. I bought the gasket from brothers, I dont remember who made it. Is anyone else having this issue?

Re: 63 gmc windshield gasket
 

Re: 63 gmc windshield gasket
 

I was going to recommend the same brand. I got steel rubber products and they are way to stiff

Re: 63 gmc windshield gasket
 

https://67-72chevytrucks.com/vboard/...d.php?t=568864

I made this thread awhile ago about these year windshields....

Re: 63 gmc windshield gasket
 

Did you paint your gasket?

Re: 63 gmc windshield gasket
 

Re: 63 gmc windshield gasket
 

Yep, been there done that, had the glass guy come back and remove the inferior gasket and install a Precision.

Re: 63 gmc windshield gasket
 

No:lol:
In your photo it looks like the gasket is painted the same color as the truck below the trim. My gasket seems like it is bulkier than yours either that or your window trim is wider.

Re: 63 gmc windshield gasket
 

It looks like there is white paint on it.

Re: 63 gmc windshield gasket
 

forest b i believe thats the paint break line you see..he has the wide trim from 60-61 custom cab which covers a good bit of the rubber.

Re: 63 gmc windshield gasket
 

Fancy. I didn’t know there are two types

Re: 63 gmc windshield gasket
 

Is that the same glass you took out to begin with?

Re: 63 gmc windshield gasket
 

Had to get new glass. It is pilkington glass
Posted via Mobile Device

Re: 63 gmc windshield gasket
 

From the pictures either the glass might be small, or the glass is not fully seated into the pinchweld. When the seal is fully seated the outer fin will sit out on the body. If your seal is not sitting flush against the cab on the inside in the same spots where the issues are on the outside of the cab the seal is not installed correctly.

Re: 63 gmc windshield gasket
 

I had a professional install it so i assume it is in correctly

Re: 63 gmc windshield gasket
 

I need to replace my windshield in the 63, and I am not sure if I want to tackle it on my own. If I crack the windshield, I would be soooo pissed.

I'm in Southern California, so I am hoping I can find someone I trust to do this. I would only go with someone that will insure me it will not crack.

Re: 63 gmc windshield gasket
 

I could try to get the info for the guy that installed mine. But he is in north Hollywood so I am not sure if he will go all the way down to Orange County

Re: 63 gmc windshield gasket
 

Yeah, that’s a long drive.

Re: 63 gmc windshield gasket
 

Man if I lived around Batavia and Collins area I'd be fat for getting stuff done on my Truck. I drove through there when I visited the Truck Shop and was impressed with the custom car shops in that area. You guys have everything.

Re: 63 gmc windshield gasket
 

If you are referring to Asshat's post, he is in Orange County CA not NY. Then yes driving for North Hollywood CA to Orange County NY would be a vary long drive for a glass man;)

Re: 63 gmc windshield gasket
 

I would appreciate the info anyways, might be worth talking to him.

Re: 63 gmc windshield gasket
 

Yes, there are quite a few shops around there. I got my seat re-upholstered in Santa Ana for $450. However, I prefer to do most of the repairs myself, I’m not rich. Some of those shops charge a ton of money for simple repairs.

Re: 63 gmc windshield gasket
 

I will see if I can get that for you. The guy that put my truck together is the one who has his contact info. So I will have to get it from him.

Re: 63 gmc windshield gasket
 

I guess I was the one that was wrong.