![]() |
recommendation for manual steering box 81-87
hey all,
wanting to change from power to manual steering. any recommendations for a manual steering box for an 86 c10? it has 2 1/2 drop spindles. id like it to be pretty easy to turn... what ratio should i use? thanks!! |
Re: recommendation for manual steering box 81-87
Most folks I know like and use redhead geasr boxes to replace their stock ones. Other wise find a good stock unit.
https://redheadsteeringgears.com/ |
Re: recommendation for manual steering box 81-87
Why change to non power steering if your wanting it to turn easy?...I can steer mine with 1 finger...
But like Bill said redhead or stock box should work |
Re: recommendation for manual steering box 81-87
Quote:
i'm looking for a good easy to turn manual gearbox. switched to wilwood manual brakes as well... i already know all the pros cons etc.... |
Re: recommendation for manual steering box 81-87
Gotcha...
The higher the ratio numbers, the easier its gonna be,,,,also a large dia steering wheel helps even more... And tire width will also affect the steering...wide tires are harder to turn than skinnys.. And thank you for your service..!!!! |
Re: recommendation for manual steering box 81-87
Quote:
i saw a 20:1 and a 23:1 online... the grant wheel i wanted to use is only 13.5 inches, is that big around enough? opinion? |
Re: recommendation for manual steering box 81-87
If your old enough to remember before power steering, think about the steering wheels in the old trucks..they were huge..for a reason..that was for steering leverage..I can remember how hard it was to steer them things when I was young..especially if the truck was sitting still..we used to have to rock the truck back and forth to get the wheels to turn..we had a grain truck with a manual box on it..haha
a 13.5 wheel isnt gonna help you much, nor will the 60s..if 23:1 is a option, that'd be the best bet..or a higher number if you can find one |
Re: recommendation for manual steering box 81-87
Quote:
thanks for all the info oh, i remember well lol learned to drive in a 71 longbed thats why i was asking about ratio's! i'll get the highest one i can find steering wheel size recommendation? |
Re: recommendation for manual steering box 81-87
I like the stock size steering wheel in my 81...personal choice on that though
|
Re: recommendation for manual steering box 81-87
Even in a manual box I'd suggest a quick ratio/variable ratio box. Might not make turning easier on the arms, but it does make turning easier by having it so you do not need to make as many revolutions of the steering wheel. I've got manual steering in my Nova, the variable ratio box is much nicer to maneuver the car with than the fixed multiturn ratio manual box it originally had.
|
Re: recommendation for manual steering box 81-87
I can tell you with a 17.5 inch aftermarket wheel, 8" wide rallys wheels with 60 series tires on my 70, that after driving it around for 3 days in town for a cruise, I felt like my wife beat my arms with a ball bat. 13.5 is a very small wheel for manual steering. It will take some work at low speeds.
|
Re: recommendation for manual steering box 81-87
15 inch steering wheel.
Unknown ratio box 245 60 15s Turns fine if rolling at all. Wish you where closer I'd give you a spare to try out. |
Re: recommendation for manual steering box 81-87
I have had a few manual steered vehicles. I would not go smaller than a 15 inch steering wheel. The large factory sized wheels are the best the leverage really makes a difference. Making the vehicle move even slightly while trying to park also helps alot.
|
| All times are GMT -4. The time now is 07:15 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com