The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)

- - Motor mount question (https://67-72chevytrucks.com/vboard/showthread.php?t=812868)

65chevysub

10-05-2020 12:09 PM

Motor mount question

Has anyone ever replaced the motor mounts with the engine in your square, with a 350? If so, how did you do it, and did you do both at the same time or one at a time?
Thanks

mongocanfly

10-05-2020 12:24 PM

Re: Motor mount question

Yep ...sure have..and if your gonna replace one, do both....I used a 2x8x8 ( I think) wood block under the oil pan and used a floor jack to get the bolts unbinded..

kwmech

10-05-2020 01:19 PM

Re: Motor mount question

Several, not all that bad with a little patience. Personally I do one side at a time

65chevysub

10-05-2020 03:30 PM

Re: Motor mount question

Thanks guys. I have 2 new mounts coming. Im off for 5 days starting Thursday so hope to get them done

Corts60

10-06-2020 05:21 PM

Re: Motor mount question

Be sure to buy quality mounts. The Taiwan models are way too stiff and will send vibrations from the engine into the cab.

65chevysub

10-06-2020 06:44 PM

Re: Motor mount question

Quote:

Originally Posted by Corts60 (Post 8818973)

Be sure to buy quality mounts. The Taiwan models are way too stiff and will send vibrations from the engine into the cab.

Got 2 from Rock Auto and they're actually made in the USA!!

All times are GMT -4. The time now is 07:15 PM.