Fuel Line 6AN with fittings
 

I have approximately 30 feet of -6 AN Russell rubber push lock hose. Plus fittings (listed below). Everything is -6 AN and Russell.

I cut the hose and installed a few fittings, then decided to go a different direction with braided hose.

No Fuel has been run through these lines...was installing when I decided to use braided hose.

Details:

7 feet hose with one end open and the other has a straight fitting.
6 1/2 feet hose with 2 straight fittings on the ends
20 inch section (no ends)

15 feet BNIB Russell Hose
1 Russell 90 push lock fitting
2 Russell 45 push lock fitting (1 BNIB, 1 scratched)

New everything was $200 plus shipping.

Would like to sell everything together

Selling for $125 shipped to lower 48

http://67-72chevytrucks.com/vboard/a...1&d=1569960862

http://67-72chevytrucks.com/vboard/a...1&d=1569960862

Re: Fuel Line 6AN with fittings
 

forgot I had these...bump