The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1947 - 1959 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=13)
-   -   55.2-59 Power rack extensions (https://67-72chevytrucks.com/vboard/showthread.php?t=814158)

Rickysnickers 11-07-2020 04:57 PM

Power rack extensions
 
For those that have installed Mustang II style suspensions, where are you getting your 2" rack extensions? I've found a couple of eBay auctions for them, but I'm interested in getting something that is of known quality. There a Heidt's kit out there, but I don't need their 4" kit at $60. I just want to get the 2" extension. Any leads? Thank you.

MiraclePieCo 11-07-2020 07:06 PM

Re: Power rack extensions
 
Speedway.

https://www.speedwaymotors.com/Musta...ions,7488.html

.

mr48chev 11-07-2020 09:55 PM

Re: Power rack extensions
 
This outfit on Ebay has extensions but no details that I can find on how much they extend the width. https://www.ebay.com/itm/2x-Inner-Ti....c100005.m1851

The description is beyond vague.

dsraven 11-08-2020 12:21 AM

Re: Power rack extensions
 
check the heidt's catalogue site in the tech tips section for their IFS geometry write up. a little insight into how it all works so you don't end up with bump steer. even if you know what you're doing, it's a good refresher.
you could alsways get a set built for you if you can't find the correct length.

bosco 11-08-2020 02:18 PM

Re: Power rack extensions
 
CPP has them as well. I would check their site.

jwhotrod 11-08-2020 02:45 PM

Re: Power rack extensions
 
Fatman Fabrications Brett makes nothing but the best. He is a mechanical engineer ontop of being a great guy and friend. you wont go wrong with his stuff.


All times are GMT -4. The time now is 11:24 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com