The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)
-   -   Exhaust routing (https://67-72chevytrucks.com/vboard/showthread.php?t=814280)

Asshat 11-10-2020 04:14 PM

Exhaust routing
 
5 Attachment(s)
Has anyone routed exhaust pipes on these trucks? Seems like everything is in the way.
I had these pipe sections and was wondering if this was the right way to route them. The bend goes over the axle, right next to the tire? On the driver side?
Just doesn’t seem right.

The Rocknrod 11-10-2020 04:46 PM

Re: Exhaust routing
 
Stock exhaust route - https://67-72chevytrucks.com/vboard/...d.php?t=677799

Asshat 11-10-2020 05:52 PM

Re: Exhaust routing
 
Quote:

Originally Posted by The Rocknrod (Post 8834167)

Ok. Thanks.
That makes a little more sense now. However, I am not sure if my spare tire carrier will be in the way.

Sledgebone 11-10-2020 08:52 PM

Re: Exhaust routing
 
3 Attachment(s)
Here's how I routed mine. I have a tank that fits between the rails instead of the spare tire. They come off the headers, over the trans crossmember, through the trailing arm crossmember and up and over the rear end as shown. I also relocated my shocks outboard of the frame.

AcampoDave 11-10-2020 11:20 PM

Re: Exhaust routing
 
Nice job Sledge. I see you even squeezed a crossover in there too. I never get tired of looking at pics of home built exhaust systems.

my04 11-13-2020 12:29 PM

Re: Exhaust routing
 
2 Attachment(s)
LOL, I took the lazy route....

Attachment 2060518

Attachment 2060519

Asshat 11-13-2020 12:53 PM

Re: Exhaust routing
 
Quote:

Originally Posted by my04 (Post 8835279)
LOL, I took the lazy route....

Attachment 2060518

Attachment 2060519

I like it. Is that purchased? Or custom?

my04 11-14-2020 09:14 AM

Re: Exhaust routing
 
Quote:

Originally Posted by Asshat (Post 8835290)
I like it. Is that purchased? Or custom?

Homemade, all pieces from local parts store.
Sounds great, little on the loud side. Would be quieter if routed out the back, but I like it.


All times are GMT -4. The time now is 09:06 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com