64 super track bar needed ECE
 

I am preparing to lower a 64 c10. I lowered a 64 a few years ago and learned that it is a year specific trac bar mount on the frame. I called Early Classic Enterprises at the time and they made a bar specific for the year. Anyone know if others may make the bar, or someone may have one? Thanks

Re: 64 super track bar needed ECE
 

No Limit (a vendor here), POL and CPP makes them.

Re: 64 super track bar needed ECE
 

What was the reason to get a “special” track bar made?
Is the frame mount different?
I would use the long version that has a Trailing arm mount on the passenger side.
And not use the rear axle mount at all.

Re: 64 super track bar needed ECE
 

The 63 and 64 panhard bar mount on the axle was a welded on stand similar to the 60-62 frames. The bar was pretty much parallel with the axle and it was longer than the 65-72 panhard bars. The mounting point on the frame for 63-64 has a different angle than the one for 65-72. I ran into that with my 63 that has a 65-70 axle in it

Re: 64 super track bar needed ECE
 

Thanks all.
cwcarpenter; thanks for the explanation

Re: 64 super track bar needed ECE
 

Porterbuilt sells mounts for both ends of the track bar at
www.pbfab.com
https://pbfab.com/1963-72-fully-adjustable-trac-bar-kit

Re: 64 super track bar needed ECE
 

Thanks lolife

Re: 64 super track bar needed ECE
 

Thanks lolife