The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1969 - 1972 Blazers and Jimmys Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=36)
-   -   Help identifying part (https://67-72chevytrucks.com/vboard/showthread.php?t=816281)

Rickjz 12-30-2020 12:42 PM

Help identifying part
 
1 Attachment(s)
I started this project 30 years ago and I'm finally finishing it. I've bought many parts along the way, sometimes twice! It is a 71 2wd Blazer. Does anyone know why I bought this? There are 2 of them.

kwmech 12-30-2020 01:04 PM

Re: Help identifying part
 
Top one looks like carpet trim either in the front or back of the tub. Bottom one kinda looks like the wiring harness gutter against the firewall

Rickjz 12-30-2020 01:22 PM

Re: Help identifying part
 
Thanks for responding. They are packaged together, so I'm sure they are a set.

Rickjz 12-30-2020 01:29 PM

Re: Help identifying part
 
They are 36" long, and the rubber piece is 2 1/4" wide.

kwmech 12-30-2020 02:22 PM

Re: Help identifying part
 
Wonder if the rubber piece is a tailgate or hatch gasket of some sort. I haven't had a K5 in about 20 years

DeadheadNM 12-30-2020 02:44 PM

Re: Help identifying part
 
That's too short for a carpet strip. Can you post more detailed photos of the metal piece? I'd like to see the profile and face better. Not looking like an OEM part to me thus far.

jaros44sr 12-30-2020 07:01 PM

Re: Help identifying part
 
Maybe a cowl vent seal,

Rickjz 12-31-2020 11:52 AM

Re: Help identifying part
 
4 Attachment(s)
What has me especially confused is that I have two of the metal pieces obviously used and in primer! It also came with screws.

DeadheadNM 12-31-2020 02:53 PM

Re: Help identifying part
 
It might be a sweep for your garage door but it's not an OE-style part that I can think of :)

Resembles parts like the tailgate upright seal retainers, single wall top hold down plates, and tailgate to hatch seal but is none of these.

Rickjz 12-31-2020 09:07 PM

Re: Help identifying part
 
Yeah, it does look like some sort of door sweep, but I don't know why I would have the used ones.


All times are GMT -4. The time now is 08:27 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com