The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   WA Under hood stuff (https://67-72chevytrucks.com/vboard/showthread.php?t=818090)

chev-obsession 02-07-2021 04:01 AM

Under hood stuff
 
5 Attachment(s)
Cleaning out the shop, here’s some stuff we’ve had for a while. Prices plus shipping.

Fans $20 each
6 cyl fan and shroud $20
Fan extensions $8 each
292? balancer $25
Power steering pump (works) with bracket $50 SOLD
Power steering half bracket $15
Alternator bracket has been milled out wider than factory for an experiment. With arm SOLD
4 speed starter, pulled from running truck. $20
Power brake booster brackets $50
Powder coated orange pulley (actually for a car) $25
Single balancer pulley $10
Double groove balancer pulley $10
Throttle linkage powder coated black with clips $15 each
6 cyl engine mount towers powder coated semi gloss black $60
V8 towers $45 SOLD
“Rayco” AC compressor? bracket $15

chev-obsession 02-07-2021 04:05 AM

Re: Under hood stuff
 
4 Attachment(s)
More pics

WETOWM 02-07-2021 10:05 AM

Re: Under hood stuff
 
How much just for the alt ajustment arm

Willys_MB 02-07-2021 11:58 AM

Re: Under hood stuff
 
Can you please share some better pictures of the power steering pump/bracket?

chev-obsession 02-07-2021 02:04 PM

Re: Under hood stuff
 
Quote:

Originally Posted by WETOWM (Post 8876371)
How much just for the alt ajustment arm

$10 plus shipping

chev-obsession 02-07-2021 02:19 PM

Re: Under hood stuff
 
4 Attachment(s)
Quote:

Originally Posted by Willys_MB (Post 8876445)
Can you please share some better pictures of the power steering pump/bracket?

Here you go. I failed to mention the pressure fitting is gone from the pump.

WETOWM 02-07-2021 02:48 PM

Re: Under hood stuff
 
Ok can you get me a shipping cost to missouri 63125

projectking 02-07-2021 03:10 PM

Re: Under hood stuff
 
I’ll take the 292 balancer

projectking 02-07-2021 03:12 PM

Re: Under hood stuff
 
Orange pulley too depending on some measurements

Willys_MB 02-07-2021 03:29 PM

Re: Under hood stuff
 
Quote:

Originally Posted by chev-obsession (Post 8876533)
Here you go. I failed to mention the pressure fitting is gone from the pump.

Sorry for my ignorance, but is this the style that mounts on the front-most bolt of the driver side exhaust manifold? I have aftermarket 4x4 manifolds on and I’m not sure if it would work for my application

chev-obsession 02-07-2021 06:23 PM

Re: Under hood stuff
 
Quote:

Originally Posted by Willys_MB (Post 8876580)
Sorry for my ignorance, but is this the style that mounts on the front-most bolt of the driver side exhaust manifold? I have aftermarket 4x4 manifolds on and I’m not sure if it would work for my application

This came from a 72 2wd suburban. It mounts to the front of the block with 2 bolts and one bolt by the rubber engine mount

chev-obsession 02-07-2021 06:24 PM

Re: Under hood stuff
 
Quote:

Originally Posted by projectking (Post 8876566)
Orange pulley too depending on some measurements

Which measurements would you like

chev-obsession 02-07-2021 06:33 PM

Re: Under hood stuff
 
Quote:

Originally Posted by WETOWM (Post 8876557)
Ok can you get me a shipping cost to missouri 63125

$10 for shipping, $10 on the arm.... $20 shipped

chev-obsession 02-07-2021 06:35 PM

Re: Under hood stuff
 
Quote:

Originally Posted by projectking (Post 8876564)
I’ll take the 292 balancer

I believe it’s a 292 balancer. You might do some homework

Willys_MB 02-07-2021 07:13 PM

Re: Under hood stuff
 
Quote:

Originally Posted by chev-obsession (Post 8876666)
This came from a 72 2wd suburban. It mounts to the front of the block with 2 bolts and one bolt by the rubber engine mount

Ok, I’ll take it then! Shipping to 83646. Thank you!

projectking 02-07-2021 08:23 PM

Re: Under hood stuff
 
Quote:

Originally Posted by chev-obsession (Post 8876668)
Which measurements would you like

Overall diameter, I believe it’s what I need for the 292

chev-obsession 02-07-2021 08:46 PM

Re: Under hood stuff
 
Quote:

Originally Posted by Willys_MB (Post 8876699)
Ok, I’ll take it then! Shipping to 83646. Thank you!

I will send you pm later tonight

chev-obsession 02-07-2021 08:51 PM

Re: Under hood stuff
 
3 Attachment(s)
Here’s all the measurements from the double groove pulley. I believe it was intended for a 327 impala/corvette with AC. The balancer looks like a 292 balancer to me but I can’t find any part numbers on it. Hopefully someone can chime in. I can get measurements later tonight

projectking 02-07-2021 09:39 PM

Re: Under hood stuff
 
Thank you, It’s a shallow groove and won’t work

chev-obsession 02-08-2021 01:18 AM

Re: Under hood stuff
 
Quote:

Originally Posted by Willys_MB (Post 8876699)
Ok, I’ll take it then! Shipping to 83646. Thank you!

I can get everything into a medium flat rate box IF your ok with me disassembling the brackets and removing the pulley from the pump. It would save a lot on shipping. $15.50 on shipping for a grand total of $65.50. If that’s cool send me a message and I’ll send you payment info

projectking 02-09-2021 08:47 PM

Re: Under hood stuff
 
Shipping for the balancer?

chev-obsession 02-09-2021 11:20 PM

Re: Under hood stuff
 
Quote:

Originally Posted by projectking (Post 8877753)
Shipping for the balancer?

Shipping will be $13. If that’s cool send me a pm for payment info

sanddunecoon 02-10-2021 03:51 PM

Re: Under hood stuff
 
if Willys MB changes his mind let me know on the power steering bracket.

Willys_MB 02-10-2021 03:55 PM

Re: Under hood stuff
 
Hey I just had a thought, have you shipped the pump/brackets yet? I am also interested in that PS half bracket

chev-obsession 02-10-2021 05:10 PM

Re: Under hood stuff
 
Quote:

Originally Posted by Willys_MB (Post 8878083)
Hey I just had a thought, have you shipped the pump/brackets yet? I am also interested in that PS half bracket

Yes I have shipped the pump setup. Returned your pm.


All times are GMT -4. The time now is 05:44 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com