The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)

- - Z bar removal (https://67-72chevytrucks.com/vboard/showthread.php?t=819557)

eric8

03-15-2021 05:56 PM

Z bar removal

1 Attachment(s)

Can someone tell me what I'm missing? How does the z bar release from the bellhousing?

Southcity

03-15-2021 06:18 PM

Re: Z bar removal

If I recall correctly, there should be a depression (flat side) on each side of the ball-stud which allows you to get an open end wrench on it to screw it out/in to the housing. You might need to degrease/clean the area to get a better look at what you are working with. If you are removing/re-installing, I highly recommend replacing all the "wear" parts (studs, seals, clips etc).

v30crewcab

03-17-2021 09:47 PM

Re: Z bar removal

loosen the bolt on the frame side, and it should move up, and out of the bracket. then you can pull it off the bellhousing knob.

All times are GMT -4. The time now is 10:49 PM.