Power Steering Pump Assembly Question
 

All - in the photos below, do I have the correct fitting orientation against the spring or is it the other way? I want to make sure before re-assembly. Thanks for your help in advance!

Where can get the seals for the 2 studs with the hex heads and the black seal for the large nut?

Re: Power Steering Pump Assembly Question
 

You can get a seal kit from any parts store. It has the o-rings & the shaft seal.
Its been so long I can't remember where the spring goes but I'm thinking its between those parts.
George

Re: Power Steering Pump Assembly Question
 

When I originally took off the nut the fitting came flying out so the spring was first installed - but I'm not sure what is correct. Thanks for your input

Re: Power Steering Pump Assembly Question
 

Flow control spring goes in first, then the flow control valve.

Re: Power Steering Pump Assembly Question
 

Bigbird - OK is the valve oriented correctly? Thanks for your help!

Re: Power Steering Pump Assembly Question
 

Yes it goes in just like you have it.

Re: Power Steering Pump Assembly Question
 

Thanks BB