The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)
-   -   Gmc jimmy rust repair (https://67-72chevytrucks.com/vboard/showthread.php?t=823411)

Zachary17 07-04-2021 06:49 PM

Gmc jimmy rust repair
 
2 Attachment(s)
So i am getting my jimmy ready for epoxy primer and I pulled the top off for the first time today.and I found all this rust in the top of the cab where the top meets the cab.and im wondering what is the best way to go about fixing this?

mongocanfly 07-05-2021 07:54 AM

Re: Gmc jimmy rust repair
 
im betting the rust creep goes well up into the space between the inner and outer roof panels... all the rust needs removed or itll come back and haunt ya...
for starters take a wire brush and clean the areas you can get to and see what it looks like under what we can see in the pic

old Rusty C10 07-05-2021 09:36 AM

Re: Gmc jimmy rust repair
 
id be looking for a good non rusted one in a scrapyard and cut the top off so you can just weld on a whole new top

blazer2007 07-05-2021 10:17 AM

Re: Gmc jimmy rust repair
 
Or cut the roof off and make 1975 style Blazer

Zachary17 07-05-2021 08:44 PM

Re: Gmc jimmy rust repair
 
3 Attachment(s)
I started looking deeper and don’t think it’s fixable

Getter-Done 07-05-2021 08:59 PM

Re: Gmc jimmy rust repair
 
I Have been waiting in the Rafters.

You could buy a roof skin for a truck.

Remove the roof skin.

Then you could see what is going on;)

Then add a lip to the truck skin ,
Since Blazer or Jimmy roof skins are not. Available.





.

mongocanfly 07-05-2021 09:02 PM

Re: Gmc jimmy rust repair
 
I agree...the roof skin needs to come off..

Zachary17 07-05-2021 10:11 PM

Quote:

Originally Posted by Getter-Done (Post 8940237)
I Have been waiting in the Rafters.

You could buy a roof skin for a truck.

Remove the roof skin.

Then you could see what is going on;)

Then add a lip to the truck skin ,
Since Blazer or Jimmy roof skins are not. Available.

You mean the lip on the side or on the back? And will a truck skin even fit I thought they where different



.

Posted via Mobile Device

84 400 07-06-2021 01:34 PM

Re: Gmc jimmy rust repair
 
How much do gutted bodies go for by you? Might be time and effort ahead to swap a better “tub” on your frame. If that’s the only rot on yours i would scab on a roof section from a tub that has a rusty bottom.

Almost everything is fixable but sometimes it makes more cents to start with something better.

Getter-Done 07-06-2021 05:22 PM

Re: Gmc jimmy rust repair
 
Quote:

Originally Posted by Zachary17 (Post 8940265)
Posted via Mobile Device

The lip in the back is what you will have to fabricate.

I just looked and the windshields are different in the jimmy and the truck.

So that roof skin may not be exactly the same.
It would have to be tweeked.

If you could find one in a (Pull your part)

That is not rusted you would be better off.

Disecting the one at a pull your part could help you practice;)
Before you remove the one on your Jimmy.







.

Zachary17 07-06-2021 08:16 PM

Quote:

Originally Posted by 84 400 (Post 8940466)
How much do gutted bodies go for by you? Might be time and effort ahead to swap a better “tub” on your frame. If that’s the only rot on yours i would scab on a roof section from a tub that has a rusty bottom.

Almost everything is fixable but sometimes it makes more cents to start with something better.

That’s the only rust besides the cracked front seat mounts.none of the scrap yards around me have any blazers and haven’t for a few years I can get trucks by the dozen but not the blazers
Posted via Mobile Device

Danmcg 07-08-2021 06:35 AM

Re: Gmc jimmy rust repair
 
Thats bad but could be fixable with some homemade patch panels.

THI 07-08-2021 10:07 AM

Re: Gmc jimmy rust repair
 
If you can find a 1973-1975 windshield frame (K5) you could convert to a full convertible top. There are folks hoarding the early windshield frames for that purpose.

84 400 07-08-2021 04:33 PM

Re: Gmc jimmy rust repair
 
My neighbor did the windshield frame and door swap. Its cool but he had trouble finding a hard top.

Zachary17 07-08-2021 09:15 PM

Quote:

Originally Posted by Danmcg (Post 8941146)
Thats bad but could be fixable with some homemade patch panels.

That’s possible I’ve never done metal work like that
Posted via Mobile Device

Zachary17 07-08-2021 09:17 PM

Quote:

Originally Posted by THI (Post 8941194)
If you can find a 1973-1975 windshield frame (K5) you could convert to a full convertible top. There are folks hoarding the early windshield frames for that purpose.

I thought about that but I don’t know what is involved with doing that.at this point I’m thinking about parting it out and starting over
Posted via Mobile Device

Zachary17 07-08-2021 11:19 PM

Re: Gmc jimmy rust repair
 
1 Attachment(s)
Also if you look at the Screwdriver in the pic that’s how far down the rust goes on both sides


All times are GMT -4. The time now is 05:06 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com