The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- All 4x4 Tech & Off Roading (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=30)

- - Step bumper question….. (https://67-72chevytrucks.com/vboard/showthread.php?t=825386)

78K20

08-31-2021 03:26 PM

Step bumper question…..

1 Attachment(s)

I’ve got this step bumper that I want to get powder coated, but I need to find out what goes in this spot beforehand. The hole is only 1” in diameter. I’m thinking too small for a trailer hook up. Looks like it was factory cut.
Any help would be greatly appreciated!
Posted via Mobile Device

Richard

08-31-2021 04:06 PM

Re: Step bumper question…..

Trailer plug hookup. A quick search will reveal the type that would fit there.

kwmech

08-31-2021 04:34 PM

Re: Step bumper question…..

Yup, trailer plug. I'm thinking the 4 prong type --lights only

57taskforce

08-31-2021 05:40 PM

Re: Step bumper question…..

Quote:

Originally Posted by kwmech (Post 8965067)

Yup, trailer plug. I'm thinking the 4 prong type --lights only

I agree that’s what my K20 had thru a similar hole when I bought it.

78K20

09-01-2021 02:23 PM

Ok. Thank you. I’m not familiar with this small of a plug. I have a car trailer with electric brakes. Takes a much larger connection.
I may leave it as is & put a rubber / plastic plug there.
Posted via Mobile Device

special-K

09-02-2021 06:26 PM

Re: Step bumper question…..

The smallest trailer connectors have no provision for brakes. I've had a connector that small on a Custom Camper to connect to the slide-in juice including tail lights and all. I always figured it was a trailer connector. I never had a trailer with no brakes.

All times are GMT -4. The time now is 08:12 AM.