![]() |
Air breather to fit Holley 4150??
3 Attachment(s)
Which inexpensive air cleaner will fit Holley 4150 carb? The zone has the basic edelbrock triangular metal hole filter around $30....If it'll fit I just grab it..not sure??? Or one the basic round drop base filters...Attachment 2131076
Attachment 2131077 Attachment 2131078 |
Re: Air breather to fit Holley 4150??
You might not have room for a drop base cleaner. You could have interference with the distributor.
A generic chrome air cleaner is all you need. If you like engine fires then buy the triangle edelbrock one. They are known to light on fire if you get a back fire. One like this would work. https://www.summitracing.com/parts/p...yABEgJ29vD_BwE |
Re: Air breather to fit Holley 4150??
just don't fall for the oil cleaned K&N nonsense, get the tallest one you can fit under the hood from Summit
|
Re: Air breather to fit Holley 4150??
Edelbrock 10" 1208 (chrome) or 1203 (black)
Discard the original filter (if you wish) and use a CA160, CA192, CA3588 depending on height desired |
Re: Air breather to fit Holley 4150??
I used the 60s 70s Chevy HP open drop housing. It fits fine with HEI and uses Corvette PCV and breather set up.
NAPA 6096 is a nice 14" X 4" filter with a foam wrap. WIX #46096. http://67-72chevytrucks.com/vboard/s...d.php?t=643974 |
Re: Air breather to fit Holley 4150??
1 Attachment(s)
I used a Speedway Motors 10" Inch Low Profile Small Chrome Air Cleaner.
https://www.ebay.com/itm/13337415515...4664ddfa0827c0 |
| All times are GMT -4. The time now is 04:54 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com