My 67 C10 Step Side project (long time comin)
 

I'm new to this blog site and I'm building a 1967 Chevy C10 Step Side. I just working on the frame now with the typical upgrades. I'm boxing in the frame, adding new CPP trans. and rear trailing arm crossmembers and Helix Mustang II IFS. I am looking for a proper Rack and pinion system now and building my own trailing arms with the help of a friend of mine who is a professional welder. The frame stance is 4 degrees nose low and 14" at the front top frame rail and 23.5" tall at the top or the rear frame rail. I expect to leave the patina painted body alone with only a few rework areas as necessary. I'm looking at a big block 396 or 454 as it's going to be a throw back to the 50's hot rod. I like the Detroit Steel Wheels - 18" f and 20" R.

Re: My 67 C10 Step Side project (long time comin)
 

Keep us posted. We are photo junkies you know. How about a build thread?

Re: My 67 C10 Step Side project (long time comin)
 

-
Welcome to the board! Looks like you have a great platform to build from. Just keep pluggin' away at it and you will be driving it before you know it.....

LockDoc

Re: My 67 C10 Step Side project (long time comin)
 

Welcome. Nice looking build you have going on there. Looking forward to seeing it progress.

Re: My 67 C10 Step Side project (long time comin)
 

Welcome! Great looking survivor C10. I have a 68 C10 SWB Stepside and have a thread on here as well. I will be sure to follow.

My build thread is located here:

1968 C10 Stepside Restoration Project - The 1947 - Present Chevrolet & GMC Truck Message Board Network
https://67-72chevytrucks.com/vboard/...d.php?t=815278

Cheers-

Re: My 67 C10 Step Side project (long time comin)
 

Welcome. You’ll find a Lot of Good People and Information here. When I started here my truck was a Bone stock 70 1/2 ton short bed. Read my signature to see where it stands now LOL
Best of Luck with your build

Re: My 67 C10 Step Side project (long time comin)
 

You’re doing stuff I’ve never seen before, looks good. Goodness more pictures and words!!!
Thanks!!!

Re: My 67 C10 Step Side project (long time comin)
 

Thanks for your interest guys. I expect to update my progress towards the end of this week (10-4-21). Expecting to have rack & pinion in, trailing arms made and positioned for hand built rear coil over shocks a nd IFS finished up (+).