73-75 vs 76-77 bucket seats
 

Could an expert on blazer bucket seat help me with the differences.

I know the top is shaped different visual....I would love a list of differences ..all differences ..I’m having a hard time with two sets of seats I have

Thanks

Re: 73-75 vs 76-77 bucket seats
 

Yes 73-75 foam is different shape then 76-77. Not sure if actual frames are different but I do know one difference is gonna be the rear bolt hole spacing is different, 73-75 is spaced at 3.75 inches and 76-77 is spaced at 5 inches. The only time this becomes an issue is if your trying to set up the seats in a truck with truck brackets. If your using k5 brackets to go into a blazer than it doesn’t apply as that 2nd inner bolt hole isn’t used. Besides that I believe the seats are identical

What exactly are you trying to figure out to do? If you have a set of 73-75 seats and want to trade for a 76-77 set I have 3 nice pairs.

Re: 73-75 vs 76-77 bucket seats
 

Thanks for the reply

I’ve got two complete sets of seat and brackets. the later brackets and seats are in better shape and I would rather use them but the holes in the floor of my 73 k5 seem off. I know that the seats are blazer seats I took them out..Plus to complicate it I have distintive industry seat covers ordered for the early seats.

I’m trying to cobble one set out off parts

Re: 73-75 vs 76-77 bucket seats
 

Post some pics of the seats and the brackets so we can see what your working with

Re: 73-75 vs 76-77 bucket seats
 

subscribed

Re: 73-75 vs 76-77 bucket seats
 

I saw your post on TCKR's thread and thought I would ask here - instead of there - about the differences between 73-75 and 76-77. If you would post some pics of what you got that would be great, there is insufficient info out there regarding squarebody buckets, IMO. What you have could be helpful.

I was lucky enough to score some "medallion" style buckets that I now know are 76-77 seats, but my goal is to reupholster them into 73-75 versions. I am wondering if there is any reason I could not simply refoam and recover them, or if there is some structural difference that means I should abandon this idea.

Re: 73-75 vs 76-77 bucket seats
 

Besides inner rear rivnut spacing being different, frames should be the same but not 100% sure. So yes, hypothetically you should be able to refoam with 73-75 and use corresponding covers.

Let me know if you try this. I have multiple sets of 76-77 and would like one more of 73-75 style.

Re: 73-75 vs 76-77 bucket seats
 

If there was a difference in the frame I would think it would be at the tops where on the early style it’ll be more narrow than the later style

Re: 73-75 vs 76-77 bucket seats
 

I have striped both set down (73-75) and (76-77) as far as I can tell there is no difference in the metal frames. The bolts in the frames line up with my hardware also.

I have ordered 73-75 seat foams and covers but have yet to install.

I can say with a 95% confidence you can make 76-77 seat frames into 73-75 seats. I will add the 5% when they are covered.

Re: 73-75 vs 76-77 bucket seats
 

This is great to know

Re: 73-75 vs 76-77 bucket seats
 

Just to follow up with this thread.....76-77 low back bucket frames are basically identical to 73-75 ....I used 73 covers from distinctive industries, 73 foams, and 76 frames.....they look like they are supposed to

Re: 73-75 vs 76-77 bucket seats
 

Post some pics!!! Can’t wait to see

Re: 73-75 vs 76-77 bucket seats
 

Here they are. I dig the two-tone, even tho it wasn’t an original option.

Re: 73-75 vs 76-77 bucket seats
 

Reid those look awesome and you did a great job. In regards to your rear seat, is it a 73-75 style with the curved 2 point armrest bars?

Re: 73-75 vs 76-77 bucket seats
 

Thanks!!!

Yes it is the type that bolts at the rear, and at the front bottom

Re: 73-75 vs 76-77 bucket seats
 

WOW THOSE 73 BUCKET SEATS ARE SO AWSOME!!!
I hope to get those results for my 73 frames in my 1973 GMC Sierra Grande shortbox
My seats were super rustfree and non ripped original covers but may rethink using the oriiginal foam now. Got your same brand covers on order in black but where did you get your foam?
Thanks for help! Love it. Mark

Re: 73-75 vs 76-77 bucket seats
 

Hotfun

I got them here


https://www.profitautointeriors.com/...iABEgLxIPD_BwE


They weren’t cheap, but at the time they were the only vendor that had them.....also they say with wires, but there were no wires in them

Reid

Re: 73-75 vs 76-77 bucket seats
 

How hard is it to apply the foam assuming the frames are stripped and clean? Do they just glue down to the frame?

Re: 73-75 vs 76-77 bucket seats
 

Oh, I might have mislead you...I didn’t put the covers on...I had a shop do them. ....I delivered to the upholstery shop the repaired frames (needed welding) the new covers from distinctive industries, the old original covers, the new cushions and the old cushions.....and some pics of what they are supposed to look like....and said fix this....lol

With that said the cushions just kinda set there....he may of put a tiny amount of glue on the, but they are an excellent fit and would stay on there own

Re: 73-75 vs 76-77 bucket seats
 

I was thinking maybe I should try it those look so nice. My original foam is such good shape no holes tears and is nice and supple. Just want them to fill out the cover as nice as what you had done. Looks like those covers are PUI brand with wire and a few places have them or closer delivery estimates. Thanks Ill post mine when they get here in June or so. lol