The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)
-   -   Rear cab wall thickness (https://67-72chevytrucks.com/vboard/showthread.php?t=827596)

Bandit130 11-07-2021 01:20 PM

Rear cab wall thickness
 
Is the rear cab wall below window a double wall? If so, does anyone know how thick it is?

Pontiac1976 11-08-2021 10:23 PM

Re: Rear cab wall thickness
 
Quote: Is the rear cab wall below window a double wall? If so, does anyone know how thick it is?

Yes the rear cab wall is double walled. For two reasons heat from exhaust heat and cut down on road noise
& reverb. Not to sure but you should be able to see near the bottom out side edge,

Big Chip 11-10-2021 01:02 PM

Re: Rear cab wall thickness
 
Quote:

Originally Posted by Bandit130 (Post 8992972)
Is the rear cab wall below window a double wall? If so, does anyone know how thick it is?

It's only double walled to just below the window. I would say there's approximately 1/2" between the layers. I think if you get a mirror in the corner and look up you will see how much room there is.


All times are GMT -4. The time now is 08:01 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com