wtb 4" x 10" Delco Style Rectangle dash speaker
 

im looking for a non damaged oem dash speaker working. i dont need brackets. wait list on new ones are july i was told from turnswitch.com

Re: wtb 4" x 10" Delco Style Rectangle dash speaker
 

This might help :chevy:

https://www.retromanufacturing.com/c...nt=31332589710

Re: wtb 4" x 10" Delco Style Rectangle dash speaker
 

ive seen them grumpy, did i hear that they are not recommended for the stock radio? anyone know?

Re: wtb 4" x 10" Delco Style Rectangle dash speaker
 

I have a professionally restored OEM speaker for our trucks that I would sell.
Will post pictures if you think you want it.
$100 plus shipping and fees

Re: wtb 4" x 10" Delco Style Rectangle dash speaker
 

I had 2 original speakers re-coned by Jackson Speaker Service, Jackson, Michigan. they did a nice job on them. At that time they didn't have a web site or FB account but they may have now. I just typed the name into Google and called them from the info on there.

LockDoc

Re: wtb 4" x 10" Delco Style Rectangle dash speaker
 

post please hooverfish, thanx lockdoc

Re: wtb 4" x 10" Delco Style Rectangle dash speaker
 

This was purchased from Dave Sutor, the radio guru of this forum, but never installed.

Re: wtb 4" x 10" Delco Style Rectangle dash speaker
 

It is a dual voice coil speaker, not necessarily a problem. Specs list the voice coils at 4 ohms. Even wired in series it will only be 8 ohms. Factory radio wants to see a 16 ohm load. You can see in the speaker pic that it is labeled 16 ohm.

Re: wtb 4" x 10" Delco Style Rectangle dash speaker
 

The picture I posted of the OEM speaker, it's a 10 ohm.
Also, factory radios for our trucks have engraved on the top of each one
"do not operate without 8 to 10 ohm speaker"

Re: wtb 4" x 10" Delco Style Rectangle dash speaker
 

I stand corrected. The speaker that Grumpy pointed out will work fine with the coils wired in series. The writing looks like 16 ohm on my trashed speaker that I took out, have never inspected the am/fm I have for the caution.

Re: wtb 4" x 10" Delco Style Rectangle dash speaker
 

if the newer style speaker will work i would rather go with that, it was the ohms i was concerned about. thanx everyone, hooverfish thank you for takin the time to post a pic