|
Gas pedal swap
1 Attachment(s)
I have a 70 blazer that I just put new power in. Still a small block but heads,valve covers and intake are making the mechanical linkage unworkable. I did a search on here and there was a fella making conversions for 71-72 style but it seems like he’s not around anymore. Has anyone done a swap that can steer me in the right direction? I found a 72 pedal in my shed full of parts so I guess I just need the brackets and cable.
|
Re: Gas pedal swap
|
Re: Gas pedal swap
Awesome. Thanks Kev. Just ordered one
|
Re: Gas pedal swap
yessir, glad to help
|
Re: Gas pedal swap
2 Attachment(s)
Here is a picture installed. Note: No drilling was required it goes through an existing hole. I believe the hole is originally for the rubber plug that retains the firewall insulation.
If you require a transmission kick down it can be installed on the bracket on the inside of the vehicle. They are a lot less expensive than the older ones attached to the carburetor. Don't forget to purchase a plug assortment to plug the original hole. + I used an aftermarket custom cable. Because of this I had to make an adapter where the cable went through, the eye on the end, to retain the end of the cable or it would just pull through. If using a stock cable this wouldn't be necessary. Attachment 2156580 |
| All times are GMT -4. The time now is 04:48 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com