The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)
-   -   Yes another blinker thread. (https://67-72chevytrucks.com/vboard/showthread.php?t=830827)

71gmcC15 02-10-2022 05:47 PM

Yes another blinker thread.
 
My blinkers work great on the driver side but as I only get like 3 blinkes out of the passager side then blower the fuse. Rear passaager taillight blinker/brake light is aslo dim. Hazzards work fine. Not shure why? 81 k10

Rickysnickers 02-11-2022 10:53 AM

Re: Yes another blinker thread.
 
Are they standard bulb or LEDs? In either case, check you ground wires. I had an issue with my LED blinkers and it turned out the ground wire wasn't ground well at all.

71gmcC15 02-11-2022 11:45 AM

Re: Yes another blinker thread.
 
Quote:

Originally Posted by Rickysnickers (Post 9033276)
Are they standard bulb or LEDs? In either case, check you ground wires. I had an issue with my LED blinkers and it turned out the ground wire wasn't ground well at all.

Regular bulbs the tails are grounded good on the driver side spot. I cleaned the paint off and reinstall it. I have a feeling it's the front passer side thats giving me the issues. I have some extra lights tied into that side power. They have thare own ground.. Going to go over it once it's nice out again

sick472 02-11-2022 12:54 PM

Re: Yes another blinker thread.
 
Pull those "extra lights tied into that side power" bulbs and see if the fuse blows.

71gmcC15 02-11-2022 02:14 PM

Re: Yes another blinker thread.
 
Quote:

Originally Posted by sick472 (Post 9033332)
Pull those "extra lights tied into that side power" bulbs and see if the fuse blows.

That's the plan. I made them just Unplugs so go me. Lol
I. I still don't see why the extra light would cuse the tune sigle fuse to blow thare not hooked to the blinkers just the running lights and they work fine. Unless it's it's actual socket I put in. The old dorman one was garbage.


All times are GMT -4. The time now is 03:39 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com