The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1969 - 1972 Blazers and Jimmys Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=36)

- - Aftermarket door wedges (https://67-72chevytrucks.com/vboard/showthread.php?t=831774)

DeadheadNM

03-07-2022 12:10 PM

Aftermarket door wedges

Curious if anyone has tried these: https://www.ss396.com/chevelle/KDW-68A.html

The brass wedges and spacer appear correct. Not sure about the striker plate.

1rippen6

03-08-2022 09:38 AM

Re: Aftermarket door wedges

If heard the wedges and the shims are correct but the stainless steel striker is not. I haven't tried, just going by what other people have told me.

Tmend

03-08-2022 10:35 PM

Re: Aftermarket door wedges

2 Attachment(s)

Yes I have personally used them. The brass wedges and shims fit perfect. The stainless plate however completely wrong size and holes don’t line up. Here are some comparisons I took. The larger one is the blazer/Jimmy one.
Attachment 2176311

Attachment 2176312

DGinney

03-09-2022 09:33 AM

Re: Aftermarket door wedges

Probably would still work I'm thinking? I need a set so this is good info. Thanks!

Tmend

03-09-2022 10:29 AM

Re: Aftermarket door wedges

Quote:

Originally Posted by DGinney (Post 9049095)

Probably would still work I'm thinking? I need a set so this is good info. Thanks!

You’d have to oval out the holes to get them to screw on. Even then the there is less contact area and may result in damage. I would use the small stainless stainless plates. You check the for sale section or put up a want to buy post

hemi43

03-09-2022 12:43 PM

Re: Aftermarket door wedges

Those would be very easy to make with simple tools. I had no idea there were no aftermarket available.

DeadheadNM

03-09-2022 06:42 PM

Re: Aftermarket door wedges

Good deal guys. Thanks for the replies.

All times are GMT -4. The time now is 02:29 AM.