The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)
-   -   Tank to Pump fuel line replace - 62 C10 (https://67-72chevytrucks.com/vboard/showthread.php?t=832159)

bhap 03-16-2022 12:45 PM

Tank to Pump fuel line replace - 62 C10
 
Does anyone have any tips or suggestions for replacing the 5/16" fuel line between the cab mounted tank and the fuel pump? There are three clips that hold the line to the frame - 2 are easily accessible but the third, front clip is inside the boxed section of frame. There is an opening, but the engine mount is pretty much in the way. I have screw in clips, but I don't see how to get a wrench on the bolt so was hoping to find an original type "push in" fuel line clip. Anyone know a source? I've found a couple of threads asking a similar question, but none that offer suggestions.

Thanks in advance for your help.

88Stanger 03-16-2022 03:13 PM

Re: Tank to Pump fuel line replace - 62 C10
 
I use Aluminum fuel line or PTFE fuel line, or a combo of both. I would say that it depends on what you plan to do with the ride, Drag it, show it, run it... Drag racing there are rules for fuel lines and types, show you may want it to look good, and so on....

bhap 03-16-2022 04:29 PM

Re: Tank to Pump fuel line replace - 62 C10
 
I have a steel replacement line. I'm trying to figure out how to replace the hard to reach front frame clip. From what I can see, it is a push in type clip, but I'm not sure where to find one or how best to reach it with the engine mount in the way.

geezer#99 03-16-2022 05:00 PM

Re: Tank to Pump fuel line replace - 62 C10
 
I’ve ran into that before.
I just moved the clip location to a better place on the frame ahead of the ugly to reach one.
Here’s a link to some clips. You might find your style and size in here.


https://www.musclecarsandclassics.ca...uel-line-clips

Or here.



https://www.google.com/search?q=fuel...AA&sclient=img

The Rocknrod 03-16-2022 10:11 PM

Re: Tank to Pump fuel line replace - 62 C10
 
Something like these? - https://www.ebay.com/itm/40034095163...EAAOxyshFRdnft
Or these: - https://www.inlinetube.com/products/ppf303

bhap 03-17-2022 03:46 PM

Re: Tank to Pump fuel line replace - 62 C10
 
1 Attachment(s)
I bought one of these - supposed to fit a 56 Corvette so maybe my truck will go faster? It is for a 5/16" line and is a "push in" style. Getting it in will be the trick!! Thanks for the suggestions - I'll let you know how it goes.


All times are GMT -4. The time now is 05:52 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com