Float height Rochester monojet
 

Anyone have the float height measurement for a 250/Rochester monojet? Can’t seem to find it and the rebuild kit didn’t come with instructions

Re: Float height Rochester monojet
 

Check this out:
https://www.carburetor-parts.com/ass...eets/K4003.pdf

Re: Float height Rochester monojet
 

I told you before.
It says 1/4 inch in my motors manual.

Re: Float height Rochester monojet
 

Yup I saw that, it was just so far off what mine was initially set at I wanted to verify. It is also a different measurement than off the chart the gentleman posted above. Not saying you are right or wrong just wanted to get some verification. I appreciate the help.

Re: Float height Rochester monojet
 

It depends on the year and displacement.... what year are we talking about here?

68
Posted via Mobile Device

Re: Float height Rochester monojet
 

Here's a different link (what I thought I was posting before):
https://www.carburetor-parts.com/ass...s/eMonojet.pdf

Page 10 right in the middle of the page.

1968 Chevrolet/GMC Truck With 250/230 and choke on the dash all transmissions. Float 9/32

Re: Float height Rochester monojet
 

Thank you a lot, I’ll reset all the settings. Discovered a vacuum leak where the intake manifold meets the block so looks like I’m doing a new gasket first. Hope that’s the source of my issues.