WTB: NOS or good used OLD Cam and lifters small block Chevy.
 

OK, looking for stock or mild RVish flat hydraulic cam and lifters for a typical flat tappet 350. NOS GM would be great but honestly I never had issue with any particular brand before the Mid90s. Anybody have something say 30 years or older from the good quality days? I would even consider used if you took the time to make sure the lifters were marked and indexed when you remove them from the engine and the condition is really nice.

Steve weim55 Colorado
Posted via Mobile Device

Re: WTB: NOS or good used OLD Cam and lifters small block Chevy.
 

I have a Erson TQ20H
that is in excellent cond
will take 100 plus ship
Jginger1942@aol.com

I`m in Ohio

Re: WTB: NOS or good used OLD Cam and lifters small block Chevy.
 

I have 350 that was rebuilt in 1979, has mild cam, 4 bolt mains, 10-1 compression.

Sat in my truck for many years where I would start it occasionally.

Pulled the motor and now it sits on a engine stand.

Has a turbo 400 attached to it also that was rebuilt at the same time.
Not willing to separate! Best offer for the pair!

Re: WTB: NOS or good used OLD Cam and lifters small block Chevy.
 

I bought s set for a 73 3/4 ton with a 350 around 96, 97.
I can check to see if it's made in China or the states if your still looking,
Let me know.

Re: WTB: NOS or good used OLD Cam and lifters small block Chevy.
 

This ad is from 2022.