front sway bar question
 

I am looking for a front sway bar for my 62 c10 with a 63 front X member. I have tried 2 different bars and they do not reach in far enough to reach the lower A frame.
What are others using for the front for their 62?

Re: front sway bar question
 

I used a sway bar off a square body on my 65.. The 63 crossmember and upper/lower control arms are the same

Re: front sway bar question
 

There's some threads here about that issue with the 60-62 trucks. I'll see if I can find one.

Re: front sway bar question
 

http://67-72chevytrucks.com/vboard/s...highlight=Sway
.
.
http://67-72chevytrucks.com/vboard/s...=1#post7603416

Re: front sway bar question
 

Thanks for the information. I think I have idea on how get this installed now. It might be a while, but I will send pictures when finished.

Re: front sway bar question
 

There's also this:
https://www.summitracing.com/parts/WST-FSBK6062
.
.
From this thread:
http://67-72chevytrucks.com/vboard/s...d.php?t=756431

Re: front sway bar question
 

Im runing factory 62 control arms then added angle iron to them and running 76 gmc factory sway bar works great

Re: front sway bar question
 

After reading the information I got here I completed my install. I bought a sway bar from LMC #34-2501. It is actually a CCP part #CCP7423 for a 63 -67 c10. POL has a bar made for the 62 and it reaches in 2 " further than the one I have but I couldn't return it so here are some pictures how I installed mine.

Re: front sway bar question
 

Nice welding and a clean install!