|
HEI distributor - where are the model numbers located?
Hey all, I've got an HEI distributor in my '67 6 cylinder pickup and wanting to order parts for it.
Does anyone know where they stamp the casting number/model number.? I'm wanting to buy a cap and internal parts and would like to know what year the distributor is from. Truck is a '67 but I'm guessing the HEI is from 70's. |
Re: HEI distributor - where are the model numbers located?
It's stamped on the side of the base. Just below where the cap sits.
Rick |
Re: HEI distributor - where are the model numbers located?
If it's at factory HEI casting model it 1975-86, since you have it in your 67 betting it a 75-80 year if it's factory casting model. You could have one of the factory 74 pre-version HEI conversion not as good. The guts deferrer for motor and option's of distributors. But 1975-86 HEI distributor casting case are all the same for your motor span.
|
Re: HEI distributor - where are the model numbers located?
All I can offer is if you have an external coil 6cyl HEI, that came factory on a 1976 250cid Nova.
|
Re: HEI distributor - where are the model numbers located?
1974-77 will have the external coil seven post cap.
1978-on will have the coil in cap setup with six posts on the cap. The inline 6 specific parts are the body, advance, shaft, gear, cap, rotor, reluctor, and pickup coil. The in cap coil D221 condenser/pigtail is the same for the V8 & inline 6. The in-cap coils should be the same. The in cap coil ignition module should be the same. |
| All times are GMT -4. The time now is 04:54 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com