37s on a 2 inch lift
 

I thought I would make a new post with a better title for anyone searching the net. There are a lot of very old post about 37s with a 4" lift but I wanted to share mine.

The front is a two inch spring and the rear spring is from a 3500 square body using no block. The steering arm is stock. I did not want to go any higher in lift because my geometry is great and I didn't want to mess it up.

The picture is of 37x12.50 Falken AT3s with a 2 inch lift. I ran it with a set of 38x14.50 KM2s around town and on the farm the past few days and nothing rubbed.



Anyway,, Wanted to share, Hope it helps someone searching the net.

Chris