![]() |
Wiring harness 63 C10
Anyone have any info on where I can get firewall electrical connectors, kinda fried mine because I forgot to cap a wire when I removed the radio. It goes to the front lighting, horn, alternator, etc. and is on the left side of the firewall. I would like to replace both pieces.
Looking for that wire harness too. |
Re: Wiring harness 63 C10
Quote:
|
Re: Wiring harness 63 C10
I know the Truck Shop has the grommets.
M&H Electric has the harnesses (original type). |
Re: Wiring harness 63 C10
It’s not that difficult to unwrap the harness, replace wire, clean terminals and re-wrap the harness if you are so inclined. AAW has the 9 pin main plug and the 6 pin engine firewall connector plug and packard terminals if needed.
|
Re: Wiring harness 63 C10
Thanks for all the replies!
Turns out, it wasn’t that bad. That connector and wires were all ok. |
Re: Wiring harness 63 C10
Great that you fixed it, but for reference, I just got that harness from Classic Parts. Item #52-230 and it's not too bad for only $39.95
|
Re: Wiring harness 63 C10
I didnt realize this guy existed he has wire parts for our series trucks and he's a vendor here - https://qualityclassicparts.com/collections/all?page=17
|
| All times are GMT -4. The time now is 11:20 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com