The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- All 4x4 Tech & Off Roading (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=30)

- - High hump (https://67-72chevytrucks.com/vboard/showthread.php?t=83701)

1969 4x4

01-03-2004 12:50 AM

High hump

I am wondering if anyone has a pic or can give me measurements on where to cut the holes in the hump for shifters... pic would be helpful..thanks

Bernie

01-03-2004 01:36 PM

Hey, I had to do just the same thing. I bought a high hump in poor shape off a member and marked around the holes. I was going to throw it away. This is for a 4 speed with a Rockwell transfer case. If it's any help to you it's yours for $10 to cover shipping.

ljbear

01-05-2004 11:31 AM

Is this for a four speed or auto? I have one of each that I can gte measurements off of.

CPNE	01-05-2004 12:33 PM

year and/or xfer case make a difference on xfer case shifter location. Assuming OE driveline, you probably have a rockwell case. Before cutting you may want to determine what you have.

All times are GMT -4. The time now is 05:56 AM.