The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   IL 72 K20 Partial Part Out (https://67-72chevytrucks.com/vboard/showthread.php?t=837722)

Furno68C20 08-30-2022 08:43 PM

72 K20 Partial Part Out
 
I have a 72 k20 that's going in the mudd. The truck is still pretty original. Cab is rusted out, Bed is in good shape. I'm willing to part out some systems, rear brakes assembly, parking brake parts, upper radiator pipe. I'm keeping the dipstick. Anything anyone can think of that they need and i wouldn't ask away.

Thanks Grant

too much stuff 08-30-2022 09:05 PM

Re: 72 K20 Partial Part Out
 
Exhaust manifolds good? Front hubs?

GottaB72’ 08-30-2022 09:14 PM

Re: 72 K20 Partial Part Out
 
I’m interested in the carb if it’s original

Louisvillekytruck 08-30-2022 09:15 PM

Re: 72 K20 Partial Part Out
 
How much for the upper pipe and any pics and if lockout hubs rings are good I can trade some others and money if yours do not have deep scratches in them thank you kenny what about the carb starter and water pump are they originals and what about the transfer case shifter knob

IronCanine 08-30-2022 09:28 PM

Re: 72 K20 Partial Part Out
 
I'll get in line on the upper radiator hose.

Other things I'd be interested in pending price/condition/type:
Fan shroud
Fan (if 7 blade)
Radiator
Caliper bracket/dust shields

Probably interested in more pending pics.

Furno68C20 08-30-2022 09:37 PM

Quote:

Originally Posted by too much stuff (Post 9118726)
Exhaust manifolds good? Front hubs?

Not the original engine. Exhaust manifolds are original but leak. Hubs are not in very good condition.
Posted via Mobile Device

Furno68C20 08-30-2022 09:38 PM

Quote:

Originally Posted by GottaB72’ (Post 9118737)
I’m interested in the carb if it’s original

Not original engine bud did come with a carb. 2 barrel
Posted via Mobile Device

Furno68C20 08-30-2022 09:42 PM

Quote:

Originally Posted by Louisvillekytruck (Post 9118740)
How much for the upper pipe and any pics and if lockout hubs rings are good I can trade some others and money if yours do not have deep scratches in them thank you kenny what about the carb starter and water pump are they originals and what about the transfer case shifter knob

I’ll get pics of the hubs and pipe. Willing to trade hubs if these are better than yours. Don’t know about the starter? Water pump wheep hole leaked so I replaced that. Keeping the shift knob.
Posted via Mobile Device

greenweenie1969 08-30-2022 09:46 PM

Re: 72 K20 Partial Part Out
 
Did it have a decent steering wheel left?

Furno68C20 08-30-2022 09:46 PM

Quote:

Originally Posted by IronCanine (Post 9118749)
I'll get in line on the upper radiator hose.

Other things I'd be interested in pending price/condition/type:
Fan shroud
Fan (if 7 blade)
Radiator
Caliper bracket/dust shields

No 7 blade fan or shroud. I’d hate to bust up the 4 core radiator. I may replace it at some point. Need caliper brackets. I’ll get pics of the dust shields. I’m using only the front brakes so need most of what I have.

Probably interested in more pending pics.

Posted via Mobile Device

Gyrine 08-30-2022 10:07 PM

Re: 72 K20 Partial Part Out
 
Sir,
I would like the emergency brake hardware. Specifically I need all the rods that go from the frame to support the e-brake cables or any other bracket that bolts to the frame associated with the e-bake cables.

Thanks
Rob

Furno68C20 08-30-2022 10:27 PM

Quote:

Originally Posted by Gyrine (Post 9118777)
Sir,
I would like the emergency brake hardware. Specifically I need all the rods that go from the frame to support the e-brake cables or any other bracket that bolts to the frame associated with the e-bake cables.

Thanks
Rob

Il see what I have tomorrow.
Posted via Mobile Device

IronCanine 08-30-2022 10:27 PM

Re: 72 K20 Partial Part Out
 
Quote:

Originally Posted by Furno68C20 (Post 9118761)
Posted via Mobile Device

Caliper brackets/dust shield should be one piece, so no worries on that. I'll just hang out in case the radiator pipe gets to me, or if something jumps out in pics.

Thanks.

Louisvillekytruck 08-31-2022 04:51 AM

Re: 72 K20 Partial Part Out
 
Quote:

Originally Posted by Furno68C20 (Post 9118759)
I’ll get pics of the hubs and pipe. Willing to trade hubs if these are better than yours. Don’t know about the starter? Water pump wheep hole leaked so I replaced that. Keeping the shift knob.
Posted via Mobile Device

Thank you sounds good I will take the hubs and pipe depending on shape and price

cst204x4 08-31-2022 06:36 AM

Re: 72 K20 Partial Part Out
 
Can you post some pics of truck

jaybatta 08-31-2022 08:30 AM

Re: 72 K20 Partial Part Out
 
Don't suppose there was a manual throttle? Aux battery tray?
Thanks

Joe

LockDoc 08-31-2022 08:58 AM

Re: 72 K20 Partial Part Out
 
-

Furno68C20


I think you need to wait until you get all of the pieces you want to sell pulled off of the truck, then post them for sale with prices listed. Board rules say that all parts for sale need to have prices posted in the ad or it will be closed. The way you are trying to do it is too confusing to everyone.

You need to read this:

http://67-72chevytrucks.com/vboard/a...nt.php?f=3&a=8

I. All for sale or trade ads must include the price. If you do not know the price of the item(s) you are selling, then you should do some research. Absolutely no auctions or bids.

II. All for sale or trade ads must include your location.

III. All sales must be posted in thread, a reply stating who is in line is also suggested. Accepting sales via Private Messages will result in confusion within the thread and is strictly prohibited.


LockDoc, Moderator
.

Orange71shorty 08-31-2022 09:02 AM

Re: 72 K20 Partial Part Out
 
I need a transfer case shifter if it’s original 72

Furno68C20 08-31-2022 10:40 AM

Quote:

Originally Posted by LockDoc (Post 9118907)
-

Furno68C20


I think you need to wait until you get all of the pieces you want to sell pulled off of the truck, then post them for sale with prices listed. Board rules say that all parts for sale need to have prices posted in the ad or it will be closed. The way you are trying to do it is too confusing to everyone.

You need to read this:

http://67-72chevytrucks.com/vboard/a...nt.php?f=3&a=8

I. All for sale or trade ads must include the price. If you do not know the price of the item(s) you are selling, then you should do some research. Absolutely no auctions or bids.

II. All for sale or trade ads must include your location.

III. All sales must be posted in thread, a reply stating who is in line is also suggested. Accepting sales via Private Messages will result in confusion within the thread and is strictly prohibited.


LockDoc, Moderator
.

Sure thing. I’ll take off what I don’t want and post it per rules. Sorry Won’t happen again.
Posted via Mobile Device

LockDoc 09-01-2022 12:07 AM

Re: 72 K20 Partial Part Out
 
Quote:

Originally Posted by Furno68C20 (Post 9118944)
Sure thing. I’ll take off what I don’t want and post it per rules. Sorry Won’t happen again.
Posted via Mobile Device


Thanks.

LockDoc


All times are GMT -4. The time now is 01:53 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com