The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)

- - Replacement frame ends (rear) ? (https://67-72chevytrucks.com/vboard/showthread.php?t=838053)

72malibu

09-12-2022 09:02 AM

Replacement frame ends (rear) ?

My dad's 75 long bed frame was altered in the rear, both rails where cut at an angle several inches from the end, and brackets bolted on for a tilt bed kit. We have removed the tilt to put it back to stock.

Does anybody know where I can get frame ends to use for repair? New or used? I don't need much.

old Rusty C10

09-12-2022 02:52 PM

Re: Replacement frame ends (rear) ?

best to find em at the boneyard then plate and weld in

jzorn94

09-13-2022 04:03 PM

Re: Replacement frame ends (rear) ?

How much of the rear frame do you need? I have an 80 C10 frame that I am scrapping. If the frames are the same I can cut the ends off and send them to you, if you want to pay for shipping.

72malibu

09-13-2022 05:01 PM

Re: Replacement frame ends (rear) ?

Quote:

Originally Posted by jzorn94 (Post 9123848)

How much of the rear frame do you need? I have an 80 C10 frame that I am scrapping. If the frames are the same I can cut the ends off and send them to you, if you want to pay for shipping.

Thanks, that would be awesome! They should be the same.

I'll send you a PM now.

All times are GMT -4. The time now is 06:29 PM.