67 teardown
 

Not much left of it but thought I would offer up before the scrap man comes for it.Transmission mount is the only thing already sold anything else you see just ask. Probably have other parts on the shelf not seen. Most all sheet metal is junk. All prices are plus shipping

manual steering box $20
Idler arm frame bracket $15
center link $75
Radiator support frame mounts $40 pair
front frame cross member $50
Tail light mid frame harness no cuts but firewall plug a little wonky $20
Tail light buckets (67 only plug) $30 pair
reverse light buckets $20 pair
6 lug coil spring rear with 3:73 gear
6 lug 3 nub rims $25 each


.

Re: 67 teardown
 

more pics
3 speed manual trans and bell housing $150
Front sway bar and brackets $125
.

Re: 67 teardown
 

more pics

.

Re: 67 teardown
 

Whats the condition of tailgate handle? Price?

Re: 67 teardown
 

Froze solid and pitted.

Re: 67 teardown
 

thank you

Re: 67 teardown
 

any dash knobs and radio knobs?

Re: 67 teardown
 

At the moment I will be keeping all of the interior stuff for a 67 step side I have sitting here same goes for the front sheet metal. Buddy buckets are already sold

Re: 67 teardown
 

I tried to respond to your pm but your box is full

Re: 67 teardown
 

Hey Richard, are the trailing arms any good?

Re: 67 teardown
 

Would like the tailgate trunions and links. These are the parts bolted to bed. Please send me a pm. Thanks.

Re: 67 teardown
 

i cleared it out if you can try again please

Re: 67 teardown
 

As per most of the east coast they have holes in them :lol:

Re: 67 teardown
 

Let me see if I can get the tailgate open. The handle is frozen but I should be able to pry it open without damaging what you need.

Re: 67 teardown
 

Thanks Richard, thought I'd give it a shot. I need to split mine and blast and weld before the rust flakes do it on their own :waah:

Re: 67 teardown
 

Hi any update?

Re: 67 teardown
 

I took them off earlier this week and got busy with work which caused it to slip my mind. Here is a picture Of what I pulled off. One bolt head snapped off. Should fit in medium flat rate box or similar so $45 including shipping for all of it.


.

Re: 67 teardown
 

Excellent thank you! I’ll take em. Pm sent.

Re: 67 teardown
 

Still available.

Re: 67 teardown
 

Do you still have the underdash harness?

Re: 67 teardown
 

I believe I do. I will pull it out today and see what condition it is in

Re: 67 teardown
 

What kind of shape are the A pillars in? (windshield)

Would you do $40 shipped on taillight and reverse light buckets, to Benson, MN 56215?
Posted via Mobile Device

Re: 67 teardown
 

Passenger side is already gone. Drivers side is fair depending on what you need. Here are a few pics. The cut would be $40 plus shipping which would depend on how big it ends up being.

.

Re: 67 teardown
 

I can do that. lot of surface rust but no holes in them. Should clean up fine.

MY PP link is in my signature line. Please leave it as goods and services so your address will show

.