60-62 Rolling Short Frame
 

As pit free a frame as you will find. The front cab mounts (for 63-66 cab) have been welded on, and some repair has been done on the lower bumper mount (still fits 60-62 bumper). Has a maybe later truck 12 bolt (cast 3817769). Rolling on 2008ish wheels, center holes cut to fit.
Start with a solid frame, Porterbuilt makes a ton of suspension stuff for these.
$850 for the rolling frame
I also have the bed sides (pictured), bed front panel, tailgate bed floor, radiator, fenders and a few more parts that could go along.
Tom

Re: 60-62 Rolling Short Frame
 

I’m interested but leaving on vacation for two weeks. Will check back. Interested in bed and frame
Thanks
Joe

Re: 60-62 Rolling Short Frame
 

What’s the difference between the 60-62 cab mounts and 63 up?

Re: 60-62 Rolling Short Frame
 

60-62 are further from the frame rail than 63-66

Re: 60-62 Rolling Short Frame
 

This frame had a 63-66 cab mounted on it. I'm assuming the original cab mounts were to wide, so later mounts were welded in place. If a 60-62 cab goes back on this frame, it'll probably need to have these mounts removed and early mounts installed.

Re: 60-62 Rolling Short Frame
 

Just the frame is remaining.