The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)
-   -   Main Power Feeds Wires: (https://67-72chevytrucks.com/vboard/showthread.php?t=840239)

cfan10 12-03-2022 10:42 AM

Main Power Feeds Wires:
 
Quick questions, I'm almost completely done wiring up the truck but need a little info on a few things.

What is the main power wire color/gauge for power windows as well as the power locks.

Which fuel tank is the main tank, I think I was using the passenger side one but haven't activity drove it since '16 I just can't remember. (Need to run the gas gauge wire to it)

What is the location color/gauge to the main power wire to the heater/ac control. Kind of stumped on that one.

'85 C10 350/350
22 circuit speedway wiring harness


As always many thanks for your help and time, it is absolutely appreciated!

Dead Parrot 12-03-2022 11:01 AM

Re: Main Power Feeds Wires:
 
On my 75 C10 with dual tanks, the primary tank is on the passenger side. On my 84 CUCV, the single tank is on the driver's side.

If you are just trying to start it, bypass the valve with some hose couplers and remove all doubt about which tank you are drawing gas out of.

Can't help with the other two. Both mine are manual windows. The CUCV is heat only.

cfan10 12-03-2022 12:12 PM

Re: Main Power Feeds Wires:
 
Thanks for the info!


All times are GMT -4. The time now is 09:19 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com