1963 sheet metal
 

I just bought a 63 c10 swb. Where can I get or does anyone sell the lower knee knocker part of the cab?. It is rusted under the corners of the windshield on both sides.

Re: 1963 sheet metal
 

My 61 was rusted in the same spot. I was able to make a patch to fit one side but the other side is worse. As far as I have seen there isn't an aftermarket panel. I'll either make a patch or cut one off another cab.

Re: 1963 sheet metal
 

Ok I will just have to make a patch for it. Thanks

Re: 1963 sheet metal
 

I might be able to help you out on the passenger side. I just cut off an a pillar off a junk truck to get the inside of the a pillar as mine was rusted out on the bottom. I think the outside part you are talking is good.

Re: 1963 sheet metal
 

Do you have a picture of it?

Re: 1963 sheet metal
 

Let me know if you want a different picture

Re: 1963 sheet metal
 

Yours is rusted in the same place as mine

Re: 1963 sheet metal
 

My truck was rusted under the windshield and the knee knocker. If you have a brake and a shrinker stretcher it's not that hard to make a patch.