The 1947 - Present Chevrolet & GMC Truck Message Board Network - Location/measurement factory inside rearview mirror 64/66?

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)

- - Location/measurement factory inside rearview mirror 64/66? (https://67-72chevytrucks.com/vboard/showthread.php?t=842906)

weim55

03-13-2023 01:54 PM

Location/measurement factory inside rearview mirror 64/66?

1 Attachment(s)

Finally remove the crappy 70s whatever inside mirror that has been in my truck the entire time I’ve had it. I would like to install this correct mirror brace but I don’t know the location on the windshield header. Anyone have A picture or measurement they could help me with this?

Steve weim55 Colorado

Braunschweiger

03-13-2023 02:03 PM

Re: Location/measurement factory inside rearview mirror 64/66?

1 Attachment(s)

Here at a 62

StanLock66

03-14-2023 09:28 PM

Re: Location/measurement factory inside rearview mirror 64/66?

1 Attachment(s)

My 66 is 26 3/8" from the sun visor top screw to the top screw of the mirror and 1" from the windshield rubber to the bottom screws on the mirror hope that helps

SkinnyG

03-14-2023 09:59 PM

Re: Location/measurement factory inside rearview mirror 64/66?

On my '61, it was neither centered nor level.

Don't overthink it - they didn't (grin).

bigmoe

03-15-2023 11:15 AM

Re: Location/measurement factory inside rearview mirror 64/66?

They must have been optional. I suspect many were dealer added. My 65 GMC never came with one. Just center it up and drill away.

All times are GMT -4. The time now is 01:58 AM.