The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)

- - LMC side fill tank (https://67-72chevytrucks.com/vboard/showthread.php?t=843037)

rws1012

03-17-2023 02:53 PM

LMC side fill tank

I bought this tank and have it installed in my 66 C10. There are 3 vent lines. How many vents do I need? LOL !!
How is the best way to terminate theses tubes?
LMC said they aren’t techs or mechanics.
I am ususing mechanical fuel pump on my 250 ci engine. All help appreciated
Posted via Mobile Device

Arne	03-17-2023 03:52 PM

Re: LMC side fill tank

Probably designed to accommodate fuel injection with various return and evap lines. For carb use, I'd merge them into a single vent hose.

61hawk

03-17-2023 06:17 PM

Re: LMC side fill tank

I capped off the big tube with a rubber vacuum cap. The other two equal sized lines were run to rear stake pockets with a rollover vent cap. If you feed the line down from the stake pocket top you can screw the cap in from the bottom and you'll never see them.

https://www.summitracing.com/parts/TNK-VVR

rws1012

03-18-2023 05:25 PM

Quote:

Originally Posted by 61hawk (Post 9187811)

Thanks. I will check out both ideas . Bed is off the truck now . Replacing brake lines and fuel line also.
Posted via Mobile Device

All times are GMT -4. The time now is 07:56 AM.