ISO 6 lug 17.5 wheel
 

If anyone has an extra 6lug 17.5 wheel, im trying to complete a set. My 68 came with 3 and i would like to keep them on the truck.

Re: ISO 6 lug 17.5 wheel
 

-
I didn't know they made them in 6 bolt. Mine is 8..... Anyway, you get a bump.... :)

LockDoc

Re: ISO 6 lug 17.5 wheel
 

Thanks for the bump. The following is an image of what mine look like. Believe to be original to the 68 I’m working on.

Re: ISO 6 lug 17.5 wheel
 

-
Are you sure that isn't a 16.5 rim? Post another picture with the tape measure on the inside of the first lip. Like the arrows in the picture below. That is where you measure it.

LockDoc

The only reason I’m sure it’s 17.5 is because I had the tires removed, they were shot.
Posted via Mobile Device

Re: ISO 6 lug 17.5 wheel
 

ttt

Re: ISO 6 lug 17.5 wheel
 

https://www.facebook.com/marketplace...3-5e8a2d4e0b10


I have ran into many, many of these in the last month while looking for 16x5 6 lugs. You will have no problem finding them on FBMP

Re: ISO 6 lug 17.5 wheel
 

Thank you. Are you looking for a full set of the 16x5? Clip or nub?

Re: ISO 6 lug 17.5 wheel
 

I had been looking for a spare 16x5 at the time for the set I had but recently sold my set to a member that wanted them.

The contacts gained while searching, have since yielded four more I took in trade just yesterday. Why, still not sure.

Just goes to show, they are out there.

Its a sickness that Never ends!

Re: ISO 6 lug 17.5 wheel
 

I have the three 17.5 that came on a 68, I figured if I find the fourth, I can either use or sell as a set. As for the 16x5 I might have a set of 5, but these are for the nub type hubcaps.