The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevy/GMC Suburbans & Panels Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=38)
-   -   Any ideas where to mount a 3 point seat belt for 2nd row (https://67-72chevytrucks.com/vboard/showthread.php?t=844044)

Dave 04-24-2023 06:56 AM

Any ideas where to mount a 3 point seat belt for 2nd row
 
I'm working on my 69 burban trying figure out the best location for mounting 3 point seat belts for the original full length 2nd row seat? Was also considering using a 2nd row seat out of an 05 burban.
Any help or pictures would be appreciated, thank you.

LockDoc 04-24-2023 02:47 PM

Re: Any ideas where to mount a 3 point seat belt for 2nd row
 
Quote:

Originally Posted by Dave (Post 9198994)
I'm working on my 69 burban trying figure out the best location for mounting 3 point seat belts for the original full length 2nd row seat? Was also considering using a 2nd row seat out of an 05 burban.
Any help or pictures would be appreciated, thank you.

I used 3 points in my '69 2nd row. I will have to see if I took any pictures. I remember I put 4" x 3/16 thick washers under the rear floor for support.

LockDoc

Dave 04-24-2023 04:00 PM

Re: Any ideas where to mount a 3 point seat belt for 2nd row
 
Quote:

Originally Posted by LockDoc (Post 9199118)
I used 3 points in my '69 2nd row. I will have to see if I took any pictures. I remember I put 4" x 3/16 thick washers under the rear floor for support.

LockDoc

Leon, thanks for posting any info.

HO455 04-24-2023 06:53 PM

Re: Any ideas where to mount a 3 point seat belt for 2nd row
 
Somewhere around here there is a thread about how to do that. I seem to remember they installed a 12 or 18 inch piece of flat bar behind the sheet metal below the edge of the headliner to attach the upper mount. Do a search, it may have been part of someone's build thread. I just remember being annoyed I didn't see it before I re-did my headliner. :lol:

CG 04-24-2023 07:35 PM

Re: Any ideas where to mount a 3 point seat belt for 2nd row
 
I agree with HO455, I did a quick search but came up empty. Like he said, probably in a burb build thread.

Dave 04-24-2023 08:42 PM

Re: Any ideas where to mount a 3 point seat belt for 2nd row
 
Quote:

Originally Posted by HO455 (Post 9199154)
Somewhere around here there is a thread about how to do that. I seem to remember they installed a 12 or 18 inch piece of flat bar behind the sheet metal below the edge of the headliner to attach the upper mount. Do a search, it may have been part of someone's build thread. I just remember being annoyed I didn't see it before I re-did my headliner. :lol:

Quote:

Originally Posted by CG (Post 9199163)
I agree with HO455, I did a quick search but came up empty. Like he said, probably in a burb build thread.

Thank you gentlemen for the guidance on the upper mounting point. Can a person use the existing holes in the floor where the male end lap belt goes to mount the 3 point retractable base?

HO455 04-24-2023 09:46 PM

Re: Any ideas where to mount a 3 point seat belt for 2nd row
 
The factory belts bolted to the rear seat brackets. I don't think you could get the retractors to work properly bolted to the seat bracket. Most retractors are sensitive to their mounting angle. I.E. they generally need to be mounted vertical or the retractor mechanism won't work.

The thread linked may help visualize what I'm attempting to explain. Vectorit has some good photos of the underside of the mounts on the first page of the thread.

https://67-72chevytrucks.com/vboard/...=698932&page=5

LockDoc 04-24-2023 11:04 PM

Re: Any ideas where to mount a 3 point seat belt for 2nd row
 
-
There is a little info starting at post 340 in this thread.....

http://67-72chevytrucks.com/vboard/s...680126&page=14

LockDoc

Dave 04-25-2023 05:04 PM

Re: Any ideas where to mount a 3 point seat belt for 2nd row
 
Quote:

Originally Posted by HO455 (Post 9199204)
The factory belts bolted to the rear seat brackets. I don't think you could get the retractors to work properly bolted to the seat bracket. Most retractors are sensitive to their mounting angle. I.E. they generally need to be mounted vertical or the retractor mechanism won't work.

The thread linked may help visualize what I'm attempting to explain. Vectorit has some good photos of the underside of the mounts on the first page of the thread.

https://67-72chevytrucks.com/vboard/...=698932&page=5

Quote:

Originally Posted by LockDoc (Post 9199227)
-
There is a little info starting at post 340 in this thread.....

http://67-72chevytrucks.com/vboard/s...680126&page=14

LockDoc

Thank you gentlemen, I think I have it figured out by looking at the links you've provided. I appreciate it!


All times are GMT -4. The time now is 02:15 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com