The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - Blower motor removal (https://67-72chevytrucks.com/vboard/showthread.php?t=845391)

chevy Dan

06-20-2023 01:14 AM

Blower motor removal

1972 P/u blower motor removal, what is the easiest way to remove it? Thanks Dan.

jumpsoffrock

06-20-2023 01:59 AM

Re: Blower motor removal

Easiest way is not favored by many people: Loosen the hood hinge bolts and scootch the hinge a bit, pop out/in the new blower motor and set hinge back in place.

I understand if you have a perfect truck with perfect panel gaps, you'd probably rather sell your soul to the devil than mess with any panel movement, not sure if there are other ways.

kwmech

06-20-2023 12:06 PM

Re: Blower motor removal

Not hard to get it back into the same place. Inner fender can be marked and there are witness marks from the washer on the bolt to get it back where it was

LockDoc

06-20-2023 02:28 PM

Re: Blower motor removal

-
I do as mentioned by kwmech. Mark around the base of the hinge, mark around the washers on the bolt and remove all but one. It's always easier with 2 people...

LockDoc

All times are GMT -4. The time now is 04:45 AM.