WTB Blazer trim screw cup washers
http://67-72chevytrucks.com/vboard/a...1&d=1587082220
I am looking for at least 10 of these guys used on the vinyl covered cardboard rear interior panels on CST trim level Blazers. I believe they are made out of stainless steel, since they seem to survive better than anything else surrounding them. I have a source for the correct self drilling/self tapping chrome trim screws, just need the screw cup washers. |
Re: WTB Blazer trim screw cup washers
This same category dated 7/26 Free blazer quarter panel interiors / maybe he'll pop them out and help you out. marko
|
Re: WTB Blazer trim screw cup washers
Quote:
Here's the Link: http://67-72chevytrucks.com/vboard/s...anel+interiors |
Re: WTB Blazer trim screw cup washers
Thanks for the link. I inquired with the poster. We shall see.
|
Re: WTB Blazer trim screw cup washers
Wish you luck!
|
Re: WTB Blazer trim screw cup washers
These work also.
https://www.ebay.com/itm/254482845360 |
Re: WTB Blazer trim screw cup washers
1 Attachment(s)
How would you even reuse these? Could you find a similar rivet?
|
Re: WTB Blazer trim screw cup washers
Still looking for these. Someone has to have a crappy panel laying around. Still can't get even a response about the ones in TX.
|
Re: WTB Blazer trim screw cup washers
Good Morning, Have you thought about going to the salvage yard and using the screws that hold the carpet trim screws to the door bottoms of upper end trucks, Suburban's, and Blazers ? I believe they are the same type of screw from the factory. I may have some available, I have to look. Every time I go to the salvage yard, I try to get little things like this that are hard to find.
The Screws should be a #8 oval head and can be replaced. It appears the Conical Washer is the main thing you are needing. |
Re: WTB Blazer trim screw cup washers
Still looking..
|
Re: WTB Blazer trim screw cup washers
I'll get a picture of what I have tomorrow
|
Re: WTB Blazer trim screw cup washers
Quote:
Okay ... I got some off a Door Panel today .. I went to Houston to get a drivers door off an 1985 K-5 along with some other items. The salvage yard would not let me pull anything, they did if for you ... never heard of this but, that's the way they do business. You mentioned 10, I should be able to get that many to you. I will try to post a picture tomorrow. |
Re: WTB Blazer trim screw cup washers
2 Attachment(s)
I have more, this is what was in the first bag.
|
Re: WTB Blazer trim screw cup washers
Those are perfect. LMK how much and how to pay. Thanks!
|
Re: WTB Blazer trim screw cup washers
Quote:
|
Re: WTB Blazer trim screw cup washers
If rippen doesn’t have the amount you need, I probably have enough to make up the difference
|
Re: WTB Blazer trim screw cup washers
I will need at least 10, but I will probably err on the side of caution and obtain 15.
|
Re: WTB Blazer trim screw cup washers
Quote:
|
Re: WTB Blazer trim screw cup washers
Still interested.
|
Re: WTB Blazer trim screw cup washers
Quote:
|
Re: WTB Blazer trim screw cup washers
1 Attachment(s)
Here's 15 so 30 plus 6 dollars shipping
|
Re: WTB Blazer trim screw cup washers
PM sent
|
Re: WTB Blazer trim screw cup washers
Received. Thank you!
|
All times are GMT -4. The time now is 02:14 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com