WTB early Corvette rocker covers,road draft tube, ram horn manifolds, aluminum intake
 

I recently picked up a rebuilt 283 for my 57 NAPCO. It currently has the stock stamped steel valve covers, a cast iron 2 barrel intake and carb. No exhaust manifolds. I am also missing the road draft tube the bolts to the block by the distributor. If anyone has a reasonably priced set of “staggered” corvette rocker covers, stock type “rams horn” exhaust manifolds and period style aluminum intake like an Edelbrock C3B/ C3BX intake with the oil filler tube provision, please advise cost and total price shipped to Leander Tx 78641.

Re: WTB early Corvette rocker covers,road draft tube, ram horn manifolds, aluminum in
 

Some parts that I have

Re: WTB early Corvette rocker covers,road draft tube, ram horn manifolds, aluminum in
 

Will look in the parts shed, thinking I have a April '57 283 4 BBL cast iron intake and a driver's side 283 '57 exhaust manifold if you would have a possible interest in either for your '57 NAPCO. Will look tomorrow and let you know for sure.

Re: WTB early Corvette rocker covers,road draft tube, ram horn manifolds, aluminum in
 

I don't know if this is the draft tube that you are looking for. It's "G" on this posting.

https://67-72chevytrucks.com/vboard/...d.php?t=847312

Re: WTB early Corvette rocker covers,road draft tube, ram horn manifolds, aluminum in
 

Not mine - found pic on interweb - but here is what you need for a stock road draft tube. Top part is under the intake and the other goes in the hole in the block using the bolt shown. I am not 100% sure if the actual hose is formed or not.

Re: WTB early Corvette rocker covers,road draft tube, ram horn manifolds, aluminum in
 

I didn’t get notifications that I had replys…��

Re: WTB early Corvette rocker covers,road draft tube, ram horn manifolds, aluminum in
 

Wideside72, sorry I totally spaced getting back with you in regards to the '57 4BBL intake and the driver's side exhaust manifold. If still in need of either let me know and will look in the parts stash. Have done two swap meets since my last posting with you, need to check and verify if I have either, both or none of those parts still. :lol:

Re: WTB early Corvette rocker covers,road draft tube, ram horn manifolds, aluminum in
 

Price on valve covers?