The 1947 - Present Chevrolet & GMC Truck Message Board Network - Reinforcing plate for master cylinder & steering column

- The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)

- - Reinforcing plate for master cylinder & steering column - What holds it on? (https://67-72chevytrucks.com/vboard/showthread.php?t=847987)

evan	10-12-2023 01:26 PM

Reinforcing plate for master cylinder & steering column - What holds it on?

1 Attachment(s)

What holds this reinforcing plate/bracket to the firewall? Is it just the bolts or is it also welded?

kwmech

10-13-2023 10:47 AM

Re: Reinforcing plate for master cylinder & steering column - What holds it on?

Spot welded to the wall

evan	10-16-2023 10:34 AM

Re: Reinforcing plate for master cylinder & steering column - What holds it on?

Quote:

Originally Posted by kwmech (Post 9250091)

Spot welded to the wall

Thanks. I'll see how it looks cleaned up before deciding if it needs to come off.

kwmech

10-16-2023 11:18 AM

Re: Reinforcing plate for master cylinder & steering column - What holds it on?

Why would you remove it? Factory put it there for a good reason.

evan	10-16-2023 11:25 AM

Re: Reinforcing plate for master cylinder & steering column - What holds it on?

Quote:

Originally Posted by kwmech (Post 9251119)

Why would you remove it? Factory put it there for a good reason.

It would get put back on. I'm cleaning up the firewall and addressing rust.

kwmech

10-17-2023 08:58 PM

Re: Reinforcing plate for master cylinder & steering column - What holds it on?

It's going to have quite a few spot welds holding it

All times are GMT -4. The time now is 11:29 AM.