The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)
-   -   fleetside box gas location (https://67-72chevytrucks.com/vboard/showthread.php?t=848144)

blap 10-20-2023 08:25 PM

fleetside box gas location
 
will a 1979 box work on a 1977 frame as far as the gas tube can they be changed to mount up to the door type?

Getter-Done 10-20-2023 09:26 PM

Re: fleetside box gas location
 
I used an 84 bed on a 78 frame.

Fleet side long bed and actually was set up with dual tanks.

A 77 frame with a 79 box should not cause a lot of issues.

I have swapped a lot of beds and tanks.

From what I remember:uhmk::lol:

The 73- 74ish had a small filler neck throat that attached direct to the bed.

And 75-77 had a bigger filler neck.


Then the 1978 box changed to the door.

The plastic box that mounts the filler neck is part of the swap.

The main thing I remember is the different diameter of the inlet on the tank.

The Early model was smaller/
Then the later model was the middle size.

The tanks with the 6.2 diesel had a bigger inlet.

So it is a matter of What tank / What filler neck / and what Bed. ;)


All times are GMT -4. The time now is 07:39 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com