Getting ready to head west again To Arzona
 

Will be leaving Friday 11/24. Will be going to Flagstaff through Phenix and Tucson with maybe some stops along the way. States IA, MO, KS, Ok, TX, NM and AZ

Re: Getting ready to head west again To Arzona
 

Are you going to have time to visit Tom? (Krazytruckin)

Hope you have a Great travel.:metal:

Re: Getting ready to head west again To Arzona
 

I'll wave as you pass by. ;)

Re: Getting ready to head west again To Arzona
 

Hope you can admire all of the rust free trucks along the way.

Re: Getting ready to head west again To Arzona
 

I'm 3 blocks south of Route 66 in The Duke City. Maybe I'll see you.

Re: Getting ready to head west again To Arzona
 

Depends on the weather. I wound not mined meeting other members.

Re: Getting ready to head west again To Arzona
 

Thats what I look for.

Re: Getting ready to head west again To Arzona
 

Will be bringing this one back.

Re: Getting ready to head west again To Arzona
 

Short bed 68?

Re: Getting ready to head west again To Arzona
 

-
Have a good trip Jim. I will see you when you get back.

LockDoc

Re: Getting ready to head west again To Arzona
 

I’m 3 hours north of your likely travel route… get a Blake’s lottaburger green chili cheeseburger while you’re in NM, you won’t regret it!

Re: Getting ready to head west again To Arzona
 

Made it to Tucumcari, NM. Stuff going to Flagstaff canceled so won't be going there just working my way to Tucson.

Re: Getting ready to head west again To Arzona
 

Im off I 10 a ways southeast of Tucson of if you run into any trouble.

Smitty

Re: Getting ready to head west again To Arzona
 

Well cut the trip short didn't get to do much picken done.

Re: Getting ready to head west again To Arzona
 

I like your Trailer stacking Abilities .:metal:

Are you a Lego Fan.?

Or a Haul it all home kinda Guy ?:lol:

I have been caught doing similar things.:ito:

Re: Getting ready to head west again To Arzona
 

Unloading may be a bit like Jenga.
That’s a pretty creative loading strategy.

Re: Getting ready to head west again To Arzona
 

It was fairly simple loading. Loaded the pickup 1st than cut 2x10s bords to 1.5' and 2' put the 2' down 1st a stacked the 1.5' ones on top all screwed to gather. jacked up the truck and set the stack under the tires and screwed that to the deck. The slid the frame under. and reversed it all to unload.

Re: Getting ready to head west again To Arzona
 

Actually a good catch. And I'm glad its going to a good home.