Coolant overflow bottle ideas
 

Anyone mount a small coolant recovery set up on the front of the radiator support? Pictures and ideas please. Thanks

Re: Coolant overflow bottle ideas
 

Here are some.


http://67-72chevytrucks.com/vboard/s...d.php?t=773213

Re: Coolant overflow bottle ideas
 

What do you think about this? Think I would find a better mount than the hose clamps.

Re: Coolant overflow bottle ideas
 

For my '63 Grand Prix I just used the existing windshield washer bottle.

K

Re: Coolant overflow bottle ideas
 

Dorman 603-001

Re: Coolant overflow bottle ideas
 

This one (DeWitts) is similar to the one in howzzzit’s post. Welded the brackets to the existing reservoir tabs, then bolted to the radiator support.

Re: Coolant overflow bottle ideas
 

Wow that looks great! Too fancy for my truck. I am thinking of mounting the Amazon tank next to the a/c receiver on the front sheet metal. I can bring the hose through the hole where the parking light wires come through on a 72.

Re: Coolant overflow bottle ideas
 

I got a stainless tank from Speedway Motors. I choose the type that reciculates the coolant back into the radiator.

Re: Coolant overflow bottle ideas
 

I am thinking about moving this to the driver's side behind the core support now that I have installed a new radiator. The old radiator in this photo sprung one too many leaks. My wife says it looks like a diamond in a goat's ass.

Re: Coolant overflow bottle ideas
 

Thought about that. How will you route the tubing?

Re: Coolant overflow bottle ideas
 

I had one of these in a '66 Mustang. I used a large "P" style cushioned clamp to mount it. It worked fine.

Re: Coolant overflow bottle ideas
 

Where might I find such a clamp?

Re: Coolant overflow bottle ideas
 

Amazon has those.

Here's a link below.
You just have to get the one for the diameter of your tank.

Link:https://www.amazon.com/s?k=cushion+c...sl_6zn8qvi7z_p

Re: Coolant overflow bottle ideas
 

Thanks Getter

Re: Coolant overflow bottle ideas
 

I put the Dorman in my 72. Bought it on Amazon. Use one existing hole and drilled another. used a 1/2" spacer for the offset in core support between holes

Re: Coolant overflow bottle ideas
 

Do you have a pic of the front of your truck with the hood shut? I am curious if that tank is easily seen through the grille.

Re: Coolant overflow bottle ideas
 

This is basically the style I use, mine is mounted on the drivers side between the grill and radiator support.......works for me!

Re: Coolant overflow bottle ideas
 

If you want to make the tank black you could use Rit dye. I've dyed many white plastic items black using Rit liquid not the powder. Use the whole bottle and as little hot water as necessary. Let er soak and rinse. Wear gloves.

Re: Coolant overflow bottle ideas
 

Sheepdip how did you route your tubing? I have an a/c condenser in the way or I would mount it on the passenger side. By the way I'm in Modesto. Can I send you a private message on another topic?

Re: Coolant overflow bottle ideas
 

Nice, clean setup.

Re: Coolant overflow bottle ideas
 

Sure can on the private message. My tubing comes back across the top of the radiator as I too have A/C stuff in the way. I'll get a pic tomorrow and post it.

Re: Coolant overflow bottle ideas
 

PMd you. Do you think if I ran the tubing down under the shroud and across to the radiator cap it would be too low to suck the juice back?

Re: Coolant overflow bottle ideas
 

I bought the same Dorman tank, but for some reason it would not fit behind my grille without a big hassle, so I mounted it on the firewall.

Re: Coolant overflow bottle ideas
 

You 6 cylinder guys have sooo much room. I like the idea, but my firewall is full of factory a/c boxes.

Re: Coolant overflow bottle ideas
 

My hose runs on top between the radiator support panel and the radiator. As long there are no leaks and the overflow bottle has coolant in it, it will suck it back.