The 1947 - Present Chevrolet & GMC Truck Message Board Network - Fuse panel

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - Fuse panel - new labels (https://67-72chevytrucks.com/vboard/showthread.php?t=849830)

Fuse panel - new labels

Has anyone made new labels for their fuse panel? The original factory labels have faded/worn off on a majority of mine. It looks like the originals were painted on silkscreened on. It's very narrow on the edges, and I'm not sure what labels would even fit. Better solution would probably be one big label/sticker that included fuse cut-outs that could go over the entire face. Thanks for any input.

Re: Fuse panel - new labels

Quote:

Originally Posted by Toro (Post 9275276)

Shame those made for a new harness aren't available, but I haven't done the research. Option to do that with labels and a printer. Or that big label. Or leave it alone;) Can always put an illustration in plastic sheet, keep it in the glove box.

https://www.loadzalabels.com/products/black-stickers

https://www.loadzalabels.com/assets/...0d176e2b49.jpg

Re: Fuse panel - new labels

Take pic of the fuse block and take it to a local graphic shop and see if they can help. If they can make you new labels have them do a 1/2 dozen sets. Use one set for your project and then sell the others to folks that are in the same boat as you are with a bit of a mark up.