The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)

- - Motor Mount Bar Question (https://67-72chevytrucks.com/vboard/showthread.php?t=852932)

shambles

06-06-2024 10:53 PM

Motor Mount Bar Question

Hello,

what is this bar on top of the K member? Looks like it ties the motor mount bracket together? Is it necessary? I'm swapping an inline six for s Small Block 350. Didn't want it to interfere with the oil pan.

https://i.imgur.com/1YBI2h3.jpg

Bloodhound

06-07-2024 01:55 AM

Re: Motor Mount Bar Question

It only came on the inline 6 trucks, can't remember what the purpose was. Mine was originally an inline 6 that I swapped a 350 into. I left it on for no particular reason. It doesn't interfere with anything, but you can remove it.

shambles

06-07-2024 09:36 AM

Re: Motor Mount Bar Question

Cool, Thanks. I'm replacing the motor mounts, so might just take it off...If anything to clean up under there too.

Dead Parrot

06-07-2024 09:55 AM

Re: Motor Mount Bar Question

If it comes off, might make a nice grab bar on a future project.

shambles

06-07-2024 02:52 PM

Re: Motor Mount Bar Question

Yeah, good idea. I'll use it for something.

All times are GMT -4. The time now is 10:18 PM.